Use of localized necking and fracture as a failure criterion in ship collision analysis

This study explores the use of localized necking for failure modeling in maritime crash analysis, using large shell elements. The assumption that the failure of a large shell element occurs simultaneously with the onset of localized necking is revisited. This study particularly investigates the numerical implementation of the localized necking condition and its implications on the results of ship collision analysis involving not only plate rupture but also various failure mechanisms such as the crushing and tearing of web girders, stringers, and their intersections. Through a series of large-scale collision simulations, the effects of bending deformation on the initiation of necking, non-proportional loading paths, and ductile fractures not preceded by localized necking, are investigated. It is demonstrated that a localized necking-based fracture model provides a reasonable, relatively mesh-insensitive estimate of the onset of fracture in the outer hull panels; however, fracture propagation is very sensitive to the numerical implementation of the necking and fracture model, especially for the cases involving the crushing of web frames and stringers.     

电压型逆变器输出电压检测与数字滤波方法研究

针对实时、准确地检测电压型逆变器输出电压基波比较困难的问题，从检测逆变器的直流支撑电压入手，提出了一种根据控制器的输出脉冲序列，利用ＤＳＰ进行实时计算逆变器输出电压基波瞬时输出值的新方案，试验结果证明了方案的可行性。     

Impacts of motor vehicle operation on water quality in the US – Cleanup costs and policies

This paper investigates the costs of controlling some of the environmental impacts of motor vehicle transportation on groundwater and on surface waters. We estimate that annualized costs of cleaning-up leaking underground storage tanks range from $0.8 billion to $2.1 billion per year over 10 years. Annualized costs of controlling highway runoff from principal arterials in the US are much larger: they range from $2.9 billion to $15.6 billion per year over 20 years (1.6–8.3% of annualized highway transportation expenditures). Some causes of non-point source pollution were unintentionally created by regulations or could be addressed by simple design changes of motor vehicles. A review of applicable measures suggests that effective policies should combine economic incentives, information campaigns, and enforcement, coupled with preventive environmental measures. In general, preventing water pollution from motor vehicles would be much cheaper than cleaning it up.     

结构型式对双层壳声辐射特性影响研究

基于有限元及边界元法，运用有限元计算软件ANSYS和声学软件SYSNOISE，通过对圆柱壳体结构形式（耐压壳板的厚度、肋骨的布置）的改变，分析了结构形式对水下结构辐射噪声的影响，找到了结构型式改变对其结构辐射噪声的影响规律。同时研究了圆柱壳不圆度对结构振动和声辐射的影响，结果表明圆柱壳不圆度的存在，一定程度上加强了水下结构的振动，且壳体截面的不圆度越大，结构的辐射声功率越大。这对降低水下航行体的噪声具有重要研究价值。     

一种电流型PWM逆变器的电荷轨迹控制法

采用空间向量原理，从空间电荷向量端点轨迹逼近于国出发，推导出ＰＷＭ脉冲模式的算法，同时采用８０９７微处理器实现这种脉冲模式和对逆变器进行控制。由实验波形看出，在较低频时逆变器的输出电流为三相对称的近似的正弦波电流，消除了低频时有害的寄生脉动转矩。     

声强法在磁悬浮列车车厢声源识别中的应用

介绍了声强法中P—P技术的使用,并讨论了在使用P—P技术进行声强测量时的相位匹配问题。利用声强法对磁悬浮列车行驶时车厢内的声源进行了识别,并从频率响应的角度对分析结果进行了判断。可以得出,磁悬浮列车以430 km／h速度行驶时,噪声主要通过车厢壁面传入车内。研究了各声强测点处1／3倍频程频谱,分析了各测点处辐射声强对车内噪声频率成分的贡献。可以得出,车厢壁面在100 Hz以下的频率贡献较大,而其它频段上,各测点的贡献相当。     

直流牵引变电所在供电系统运行仿真中的建模

讨论了直流牵引变电所在供电系统运行仿真中的建模问题。直流牵引变电所主要由整流变压器和硅整流器构成。在进行直流牵引供电系统的运行仿真时,将其按戴维南电路建模,其等效内电阻和理想电压源由交流电源和整流机组的参数以及负载情况决定。本文给出了12脉波整流机组的计算实例。     

防波堤建设期的风险管理与工程保险

由于防波堤所处的海洋工程环境、施工期间自身结构的相对薄弱性等,对防波堤建设期的风险进行分析、管理的研究对指导实际工程抵御风险有重要的意义。本文介绍了防波堤建设期面临的风险源、其风险如何去评价、如何通过风险管理有效地降低风险、通过工程保险的手段转移风险的内容、方法和目前的研究进展。     

转臂轴箱定位节点位置对机车动力学性能影响分析

利用SIMPACK建立某出口2B0机车动力学模型,分析了转臂轴箱定位节点的纵向位置对机车动力学性能的影响.研究表明节点纵向位置对机车横向稳定性有较显著影响,而对机车直线和曲线通过性能影响不大.得出了在动力学模型中,需要把转臂作为一个单独元件考虑,以减小计算误差的结论.