智能汽车专业校企合作模式及人才培养方式的探究

智能汽车已经成为未来汽车领域的发展方向,且高校逐渐与企业合作,建立智能汽车人才培养模式。但是现阶段,校企合作深度以及人才培养方式仍然存在一定的不足,不利于为智能汽车领域输送更多的人才。基于此,本文主要探究智能汽车专业校企合作模式以及人才培养模式,详细阐述智能汽车专业校企合作模式及人才培养模式中存在的问题,进而提出针对性的建议。     

先期振动对高聚物胶凝堆石料动变形特性的影响

先期振动对土石坝地震变形影响显著。通过开展不同先期动应力作用下的动三轴试验,研究了先期振动对未加固堆石料和高聚物胶凝堆石料动变形特性的影响。结果表明:先期振动对未加固堆石料和高聚物胶凝堆石料的弹性轴应变无明显影响,但显著降低了其塑性轴应变;未加固堆石料和高聚物胶凝堆石料的残余变形在先期振动影响下显著减小,与未经受先期振动的试样相比,先期动应力为40%围压的试样,最大残余剪应变降低幅度和最大残余体应变降低幅度的平均值分别为48.1%和42.0%;先期动应力为80%围压的试样,最大残余剪应变降低幅度和最大残余体应变降低幅度的平均值分别为80.9%和71.6%。先期动应力幅值越大,再次经历动应力时未加固堆石料和高聚物胶凝堆石料产生的残余变形越小,抵抗变形能力提高越明显。最大残余变形的降低幅度与固结比、围压及高聚物含量无关。随后修正了沈珠江动残余变形模型,修正后的残余变形模型可以反映高聚物对堆石料残余剪应变和残余体应变的影响。与未经受先期振动的试样相比,先期动应力为40%围压的高聚物胶凝堆石料(高聚物质量比R_p=2%)的改进残余变形模型参数c₁和c₄分别降低了27.7%和61.2%;先期动应力为80%围压的高聚物胶凝堆石料(R_p=2%)的改进残余变形模型参数c₁和c₄分别降低了68.8%和79.3%。     

西韩城际铁路湿陷性黄土地层现场浸水试验研究

在分析西韩城际铁路沿线黄土分布特征的基础上,选取代表性场地开展现场试坑浸水试验。试验结果表明:场地实测最大自重湿陷量为46 mm,仅为室内压缩试验计算值的0.23倍;湿陷土层厚度15 m,除Q;黄土全部具有湿陷性外,Q;上部黄土亦具有湿陷性;地表水自然入渗深度超过50 m,浸润角约为40°,浸润范围约为浸水试坑直径的1.7倍。对现场实测值和室内计算值差异原因进行深入分析,得出在黄土结构未完全破坏之前,发生过湿陷的土体在特定条件下还有可能再次湿陷的结论。     

一种高铁CTC进路数据自动测试方法的设计与实现

调度集中系统与计算机联锁接口中的进路数据的测试存在工作量繁重、耗时长以及人为因素易出错等问题,针对该问题提出一种自动测试方法,可有效的解决进路数据的自动测试及测试结果的自动分析,多条高铁线路实践表明,能显著提高调度集中系统与计算机联锁接口的测试效率及数据正确率,使CTC系统产品更安全可靠。     

泰国三机场高铁列控系统方案研究

对泰国三机场高铁项目的列控系统选择要求进行分析,提出列控系统方案并进行综合比选,最后提出泰国三机场高铁项目的列控系统推荐方案,研究成果可以为海外项目列控系统方案选择提供一定的参考。     

ROV attitude control based on multi-motor cooperative propulsion北大核心CSCD

[目的]为了提高遥控水下航行器(ROV)在复杂水下环境中的姿态控制性能,开展多电机协同推进的ROV姿态控制研究。[方法]首先,针对多电机系统的结构和算法,分别提出一种基于PID速度补偿器的偏差耦合结构和一种新型非奇异终端滑模控制(SMC)算法,并设计一种新颖的基于多电机协同推进的ROV姿态控制方法;然后,建立ROV的运动学和动力学模型,开展推进器组推力建模分析、解耦简化ROV动力学模型研究;最后,设计一种ROV滑模姿态控制器。[结果]仿真结果表明,所提的结构和算法可提高多电机系统的抗干扰性、同步性和快速响应能力,进而提高ROV姿态控制系统的稳定性与鲁棒性。[结论]所提方法可为ROV姿态控制提供一种新的可用方案。     

Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

新机场管廊基坑邻近高速桥梁基础施工技术研究

新机场高速公路地下综合管廊大部分结构距在建新机场高速公路桥梁较近,基坑开挖过程易导致高速公路桥梁承台及桩侧土体外露,进而导致桥梁基础产生水平变位、不均匀沉降等现象,对高速公路后期运营产生极大的安全隐患。通过3组试验确定最优注浆参数,在管廊基坑开挖过程中对既有高速桥梁基础附近土体进行注浆加固,效果良好;通过对开挖过程中基坑、桥梁基础变形监测数据进行对比分析,对管廊基坑邻近桥梁基础开挖防护施工技术进行总结,为以后同类工程提供借鉴。     

内河船舶和国内海船CO2系统的异同分析

针对船舶现场检验中发现的固定式灭火系统的CO₂系统以及瓶头阀及其相关组件的各种缺陷,主要阐述内河船舶CO₂系统和国内海船CO₂系统的异同、瓶头阀的结构、释放总管的安装要求、泄放总管的安装要求、控制管路的安装要求,这也是验船师现场检验的难点,以期相关人员在遇到问题时了解如何处理。     

基于多点线圈联合数据的高速公路匝道影响范围识别

为准确识别高速公路匝道对主线车流的影响等级和范围，本文提出基于速度波动特性的高速公路匝道影响量化方法。通过建立改进加权速度排列熵指标以量化各服务水平下匝道对高速公路主线车流的影响，对建立的指标进行谱聚类分析来确定匝道的影响阈值。应用京昆高速及二广高速的99个平行式合流匝道和直接式分流匝道多点主线线圈检测器数据的分析结果表 明，所提出方法可识别高速公路主线车流受匝道的影响程度。合流匝道对主线最外侧车道的影响比次外侧车道高4%~69%；A~C级服务水平下，分流匝道对上游主线最外侧车道影响程度比次 外侧车道高6%~29%，D~F级服务水平下，最外侧车道受影响程度比次外侧车道低10%~13%。合流匝道的影响范围是合流点上游350m至下游550m；其中上游160m至下游100m和下游180~ 270m为核心影响范围。分流匝道影响范围为分流点至主线上游850m，其中750~850m、450~ 600m、100~300m为核心影响范围。研究成果可为高速公路匝道交通设计、管控策略和提升仿真可靠性提供依据，可有效降低设置匝道带来的影响。