ROV attitude control based on multi-motor cooperative propulsion北大核心CSCD

[目的]为了提高遥控水下航行器(ROV)在复杂水下环境中的姿态控制性能,开展多电机协同推进的ROV姿态控制研究。[方法]首先,针对多电机系统的结构和算法,分别提出一种基于PID速度补偿器的偏差耦合结构和一种新型非奇异终端滑模控制(SMC)算法,并设计一种新颖的基于多电机协同推进的ROV姿态控制方法;然后,建立ROV的运动学和动力学模型,开展推进器组推力建模分析、解耦简化ROV动力学模型研究;最后,设计一种ROV滑模姿态控制器。[结果]仿真结果表明,所提的结构和算法可提高多电机系统的抗干扰性、同步性和快速响应能力,进而提高ROV姿态控制系统的稳定性与鲁棒性。[结论]所提方法可为ROV姿态控制提供一种新的可用方案。     

Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

面向新型混合交通流的智能交叉口网络布局优化

考虑网联自动驾驶车辆(Connected Autonomous Vehicle, CAV)应用先进的车联网与自动驾驶技术，可以采用智能交叉口的组织形式，大幅提升交叉口的通行效率，为降低CAV与人工驾驶车辆(Human-driven Vehicle, HV)混行条件下城市交通系统的整体出行成本，提出智能交叉口在城 市交通网络中的布局优化问题，建立数学优化模型并求解。首先，基于对两类车辆行驶特性的分析，建立混合用户均衡模型，描述CAV与HV的路径选择行为；其次，从交通规划者的角度，以系统最优为目标，整合混合用户均衡模型，建立面向新型混合交通流的智能交叉口网络布局优化模型，并利用改进的遗传算法求解；最后，选取Sioux-Falls交通网络作为案例分析，验证模型与算法的有效性，并研究CAV渗透率变化对优化结果的影响。研究表明，智能交叉口在城市路网中的合理规划极大地提高了新型混行场景下城市交通系统的出行效率，同时，大幅降低了由于网联自动 驾驶单方面技术优势带来的CAV与HV的出行效率差距，增进了出行公平性。     

基于车辆自动定位数据的有轨电车运行效率分析与应用

结合有轨电车线路的现有车辆自动定位数据,分析有轨电车运行效率及其相关影响因素。其中,影响因素从站台、路段、交叉口3个方面进行考虑。定性分析了不同站台型式、站台位置、交叉口类型的属性特征,并量化不同路段的路段长度、所包含的交叉口个数,同时考虑了交叉口控制策略对有轨电车运行时间的影响。以某已运营的有轨电车线路为例,通过建立多元线性回归模型,从不同层面探究不同因素对已运营有轨电车线路运行效率的影响。最后用模型对有轨电车新建线路的运行效率进行预测,并提出建议。     

含初始变形船体加筋板有效宽度及剩余极限强度研究

为了评估舰船结构损伤后的剩余强度,对船体加筋板出现初始几何变形后,参与总纵强度的有效宽度和加筋板剩余极限强度进行研究。将加筋板受到垂直于平面压力后的变形,作为其初始几何变形,改变变形的方向和大小,利用有限元软件Ansys对加筋板结构进行线性和非线性分析。定义了板有效宽度计算方法,对不同变形方向和变形幅值时板的有效宽度和加筋板的极限强度进行对比分析,并拟合得到了计算板有效宽度和加筋板极限强度的经验公式。结果表明,初始几何变形会削弱加筋板结构的强度。在对损伤后船体结构强度进行分析和校核时,提出的经验公式可以直接用来计算板的有效宽度和加筋板的极限强度。     

大型船舶钨极氩弧重熔工艺应用

疲劳破坏是船体结构的主要破坏形式之一。改进结构节点的设计和施工工艺,可保证船体结构中受交变载荷作用的构件有足够的疲劳寿命。钨极氩弧(Tungsten Inert Gas, TIG)重熔是改善结构节点焊后疲劳强度的有效方法。与目前船上常用的几种改善疲劳强度的方法进行分析对比,对TIG重熔工艺的重要性进行充分论证,获得实施TIG重熔工艺的技术标准和操作要点。TIG重熔工艺不仅改善结构节点疲劳强度,而且为建造具有较长疲劳寿命的大型船舶找到一个行之有效的方法,可产生良好的经济和社会效益。     

散货船舱口盖剩余强度

通过对散货船舱口盖极限强度的理论分析，采用了正交各向异性板及刚塑性模型进行了理论上的推导，并对7万t散货船的1号舱的舱口盖(两块对称滚动式)，进行了ILL66及IACS URS21(1998年版与上述ILL66的88议定书中载荷的量级相当)的外载荷的比较及线性和非线性的有限元分析。本文所采用的有限元的线性及弹塑性计算对实际的舱口盖进行评估的结果证明，IACS URS21(ILL66的88议定书)的标准比ILL66的标准有所提高。采用非线性有限元法是在初始设计阶段使用的可行方法。这些结果可供规范研制工作参考。     

S^2 BHCA Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill ＆ simulation based hybrid control architecture （S^2BHCA） as the controller＇s design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S^2BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the ＂skill＂. The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three ＂skills＂ for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S^2BHCA.     

列车通信网络研究现状及展望

介绍了列车通信网络的主要任务和列车通信网络的拓扑结构,阐述了列车通信网络(TCN)的发展历程及目前国内外列车通信网络的发展现状,并展望了列车通信网络技术的发展趋势。