无砟轨道板精调车结构可靠性分析及优化

为提高无砟轨道板精调车结构的设计水平,考虑精调车荷载、几何尺寸和材料弹性模量等设计变量的随机性,对精调车结构进行可靠性分析、可靠性灵敏度分析和可靠性优化。首先,分析并得到精调车结构在串联失效模式下的结构功能函数;然后,运用响应面法和重要抽样方法,分析得到基于确定性优化的精调车结构的失效概率和可靠性灵敏度结果。最后,根据可靠性灵敏度分析结果,对该结构进行可靠性优化。分析精调车结构在可靠性优化前后的差异,结果表明,与确定性优化结果相比,可靠性优化使精调车结构自重增加了3.55%,但可靠度提高为0.999 999 987 7,说明设计变量的随机性对结构性能的干扰大幅减小。     

GPS动态定位中自适应卡尔曼滤波模型的建立及其算法研究

采用描述机动载体运动的“当前”统计模型，建立了一种新的ＧＰＳ动态定位自适应卡尔曼滤波模型。为了进一步提高滤波器的动态性能，提出一种改进的自适应滤波算法，大大提高了ＧＰＳ动态定位卡尔曼滤波器的跟踪能力，改善了滤波效果。计算机仿真结果验证了该算法的有效性。     

数字式点火模块自适应控制的研究

采用了在常规汽油机上仅利用分电器输出的点火触发信号进行点火提前和点火能量自适应控制的方法；根据国家有关标准进行了自适应点火控制模块的软硬件设计，经道路和发动机台架试验证明该点火器能在一定程度上提高使用车辆的经济性。     

基于神经网络的半主动悬架自适应模糊控制

提出了基于神经网络的自适应模糊控制策略。模糊控制主要用来对付系统的非线性；神经网络根据振动响应的方差递推结果来辨识车体的振动情况实时调节模糊控制器的量化因子，使模糊控制器对路面的变化具有自适应的能力。在半主动悬挂1／4车非线性模型的基础上进行了仿真研究。     

汽车半主动悬架的神经网络自适应控制

本文提出了用两个线性神经网络对汽车半主动悬架系统进行在线辨识和控制的策略，介绍了该控制系统中神经网络的在线训练方法，进行了仿真计算和结果分析。     

自适应信号控制下交叉口延误计算方法研究

为了研究交通信号的自适应控制方法,需要对交叉口延误进行定量的分析与计算。本文根据信号交叉口理论,在以往定时信号延误研究的基础上,基于交叉口一个进口方向的车辆延误分析,推导了信号控制交叉口不同交通运行状况下的交叉口延误公式;进而对自适应信号控制下交叉口延误的计算方法进行了研究,提出了自适应信号控制下交叉口延误的计算方法———根据交叉口各进口方向不同的交通运行状况以及所处的相序选择相应的公式计算交叉口各进口方向的车辆延误,然后对其求和,得到交叉口延误。     

基于BP网络的球鼻首参数化优化

本文以某集装箱船为研究对象,对降速航行后的球鼻首进行优化。采用Catia建立船体三维模型,为了产生不同形状的球鼻首,选取球鼻特征参数来描述其基本结构;采用拉丁超立方试验抽样方法得到12组不同形状的球鼻首,提出运用非线性拟合能力较强的BP网络构建球鼻首参数和阻力系数之间的关系模型;采用遗传算法对训练后的网络进行极值寻优。结果显示,优化船型的阻力系数显著降低,说明该方法对球鼻首的优化有一定的借鉴意义。     

A real-time adaptive signal control in a connected vehicle environment

The state of the practice traffic signal control strategies mainly rely on infrastructure based vehicle detector data as the input for the control logic. The infrastructure based detectors are generally point detectors which cannot directly provide measurement of vehicle location and speed. With the advances in wireless communication technology, vehicles are able to communicate with each other and with the infrastructure in the emerging connected vehicle system. Data collected from connected vehicles provides a much more complete picture of the traffic states near an intersection and can be utilized for signal control. This paper presents a real-time adaptive signal phase allocation algorithm using connected vehicle data. The proposed algorithm optimizes the phase sequence and duration by solving a two-level optimization problem. Two objective functions are considered: minimization of total vehicle delay and minimization of queue length. Due to the low penetration rate of the connected vehicles, an algorithm that estimates the states of unequipped vehicle based on connected vehicle data is developed to construct a complete arrival table for the phase allocation algorithm. A real-world intersection is modeled in VISSIM to validate the algorithms. Results with a variety of connected vehicle market penetration rates and demand levels are compared to well-tuned fully actuated control. In general, the proposed control algorithm outperforms actuated control by reducing total delay by as much as 16.33% in a high penetration rate case and similar delay in a low penetration rate case. Different objective functions result in different behaviors of signal timing. The minimization of total vehicle delay usually generates lower total vehicle delay, while minimization of queue length serves all phases in a more balanced way.     

Fractional-order-based ACC/CACC algorithm for improving string stability

Traffic flow optimization and driver comfort enhancement are the main contributions of an Adaptive Cruise Control (ACC) system. If communication links are added, more safety and shorter gaps can be reached performing a Cooperative-ACC (CACC). Although shortening the inter-vehicular distances directly improves traffic flow, it can cause string unstable behavior. This paper presents fractional-order-based control algorithms to enhance the car-following and string stability performance for both ACC and CACC vehicle strings, including communication temporal delay effects. The proposed controller is compared with state-of-the-art implementations, exhibiting better performance. Simulation and real experiments have been conducted for validating the approach.