先期振动对高聚物胶凝堆石料动变形特性的影响

先期振动对土石坝地震变形影响显著。通过开展不同先期动应力作用下的动三轴试验,研究了先期振动对未加固堆石料和高聚物胶凝堆石料动变形特性的影响。结果表明:先期振动对未加固堆石料和高聚物胶凝堆石料的弹性轴应变无明显影响,但显著降低了其塑性轴应变;未加固堆石料和高聚物胶凝堆石料的残余变形在先期振动影响下显著减小,与未经受先期振动的试样相比,先期动应力为40%围压的试样,最大残余剪应变降低幅度和最大残余体应变降低幅度的平均值分别为48.1%和42.0%;先期动应力为80%围压的试样,最大残余剪应变降低幅度和最大残余体应变降低幅度的平均值分别为80.9%和71.6%。先期动应力幅值越大,再次经历动应力时未加固堆石料和高聚物胶凝堆石料产生的残余变形越小,抵抗变形能力提高越明显。最大残余变形的降低幅度与固结比、围压及高聚物含量无关。随后修正了沈珠江动残余变形模型,修正后的残余变形模型可以反映高聚物对堆石料残余剪应变和残余体应变的影响。与未经受先期振动的试样相比,先期动应力为40%围压的高聚物胶凝堆石料(高聚物质量比R_p=2%)的改进残余变形模型参数c₁和c₄分别降低了27.7%和61.2%;先期动应力为80%围压的高聚物胶凝堆石料(R_p=2%)的改进残余变形模型参数c₁和c₄分别降低了68.8%和79.3%。     

表面选区强化对钢轨波磨处轮轨滚动接触行为的影响

层流等离子体表面强化技术可大幅提高钢轨表面的硬度和耐磨性。为了揭示强化处理对轮轨滚动接触行为的影响,建立同时考虑钢轨表面选区强化和短波波磨的三维轮轨瞬态滚动接触有限元模型,数值计算了车轮高速滚过一个波磨周期的轮轨力、接触斑黏滑分布和残余应力应变。对比发现:表面选区强化对轮轨力和接触斑黏滑分布的影响较小,不影响钢轨承载性能;对钢轨表面残余应力应变分布的影响明显,残余应力主要集中在屈服强度较高的强化斑内而残余应变主要集中在韧性较好的基体材料上,表面选区强化有效结合了强化斑和基体材料的力学性能,形成了一种强韧的良好匹配。结果可为现场生产服务提供一定的理论指导和应用参考。     

Use of localized necking and fracture as a failure criterion in ship collision analysis

This study explores the use of localized necking for failure modeling in maritime crash analysis, using large shell elements. The assumption that the failure of a large shell element occurs simultaneously with the onset of localized necking is revisited. This study particularly investigates the numerical implementation of the localized necking condition and its implications on the results of ship collision analysis involving not only plate rupture but also various failure mechanisms such as the crushing and tearing of web girders, stringers, and their intersections. Through a series of large-scale collision simulations, the effects of bending deformation on the initiation of necking, non-proportional loading paths, and ductile fractures not preceded by localized necking, are investigated. It is demonstrated that a localized necking-based fracture model provides a reasonable, relatively mesh-insensitive estimate of the onset of fracture in the outer hull panels; however, fracture propagation is very sensitive to the numerical implementation of the necking and fracture model, especially for the cases involving the crushing of web frames and stringers.     

驾驶员手伸及界面与驾驶室尺寸综合因子G

驾驶员手伸及界面与驾驶员的手伸、能力及驾驶室内部尺寸有关。驾驶员手伸及能力的统计性可通过身材百分位和男女比来反映。而驾驶室内部尺寸对手伸及界面的影响应以多元统计分析理论加以分析。本文介绍如何利用因子分析法来求取对手伸及界面具有综合影响的驾驶室尺寸综合因子G。     

Driver steering and muscle activity during a lane-change manoeuvre

The article reports an experimental study of driver steering control behaviour in a lane-change manoeuvre. Eight test subjects were instrumented with electromyography to measure muscle activation and co-contraction. Each subject completed 30 lane-change manoeuvres with one vehicle on a fixed-base driving simulator. For each driver, the steering torque feedback characteristic was changed after every ten manoeuvres; the response of the vehicle to steering angle inputs was not changed. Drivers' control strategies were found to be robust to changes in steering torque feedback. Path-following errors, muscle activity and muscle co-contraction all reduce with the number of lane-changes performed by the driver, suggesting the existence of a learning process. Comparing the test subjects, there was some evidence that high levels of co-contraction were used to allow high-frequency steering inputs to be generated. The results contribute to the understanding of vehicle-driver (and more generally, human-machine) dynamic interaction.     

杭州湾跨海大桥70 m预应力混凝土箱梁用海工耐久混凝土的试验研究

通过平板抗裂试验,研究了海工耐久混凝土的早期抗裂性,采用RCM法研究了海工耐久混凝土抗氯离子渗透的能力。结果表明,使用P.Ⅱ42.5(R)硅酸盐水泥、Ⅱ区中砂、5~25 mm碎石、Ⅰ级或Ⅱ级低钙粉煤灰、粒化高炉矿渣粉及新一代高性能高效减水剂,可以配制出C 50~C 60海工耐久混凝土。     

直流牵引变电所在供电系统运行仿真中的建模

讨论了直流牵引变电所在供电系统运行仿真中的建模问题。直流牵引变电所主要由整流变压器和硅整流器构成。在进行直流牵引供电系统的运行仿真时,将其按戴维南电路建模,其等效内电阻和理想电压源由交流电源和整流机组的参数以及负载情况决定。本文给出了12脉波整流机组的计算实例。     

转臂轴箱定位节点位置对机车动力学性能影响分析

利用SIMPACK建立某出口2B0机车动力学模型,分析了转臂轴箱定位节点的纵向位置对机车动力学性能的影响.研究表明节点纵向位置对机车横向稳定性有较显著影响,而对机车直线和曲线通过性能影响不大.得出了在动力学模型中,需要把转臂作为一个单独元件考虑,以减小计算误差的结论.