Costs of air pollutants from shipping: a meta-regression analysis

ABSTRACT

This study estimated the external cost of air pollution from shipping by means of a meta-regression analysis, which has not been made before. Three pollutants, which were included in most of the primary studies, were considered: nitrogen oxides (NO_x), sulphur dioxides (SO₂) and particulate matters with a diameter of max 2.5 micrometres (PM_2.5). All primary studies included damages of health and a majority added impacts on agriculture and estimated the cost of air pollutants by transferring cost estimates from studies on costs of air emissions from transports in Europe. Different regression models and estimators were used and robust results were found of statistically significant emission elasticities of below one, i.e. total external costs increase by less than 1% when emissions increase by 1%. There was a small variation between the pollutants, with the highest elasticity for PM_2.5 and lowest for NO_x. Calculations of the marginal external cost of the pollutants showed the same pattern, with this cost being approximately six times higher for PM_2.5 than for the other pollutants. Common to all pollutants was that the marginal external cost decreases when emission increases. Another robust result was a significant increase in the cost of studies published in journals compared with other publication outlets. These findings point out some caution when transferring constant external unit cost of air pollutant from shipping, which is much applied in the literature, and the cost functions estimated in this study could thus provide a complementary transfer mechanism.     

Online channel strategies under different offline channel power structures for the Belt and Road of China

ABSTRACT

This paper explores the online channel strategies adopted by Chinese manufacturers with regard to the Belt and Road. It also investigates the effect of offline channel power structures and maritime transportation costs on online channel mode selection and pricing strategies. The offline channel power structures are classified into three types, namely, Chinese manufacturer Stackelberg (MS) structure, vertical Nash (VN) structure, and foreign retailer Stackelberg (RS) structure. Furthermore, a game model is developed among the Chinese manufacturer, foreign retailer, and cross-border e-tailer to investigate the interactions among offline channel power structures, maritime transportation costs, and Chinese manufacturers’ online channel mode selection. The results show that Chinese manufacturers’ preferences for the online agency selling mode increases correspondingly with the decrease in their market position and bargaining power. Moreover, foreign retailers can obtain higher profits in the online agency selling mode under the VN structure. However, the level of profit for foreign retailers depends on the intensity of their competition with cross-border e-tailers under the MS and RS structures. Finally, consumers in countries along the Belt and Road can obtain a higher surplus in the online agency selling mode under all of the structures.     

采用喷风冷却工艺提高淬火钢轨性能的研究

钢轨喷风淬火工艺采用单一的冷却介质压缩空气,使淬火冷却均匀性得到提高,而且不受钢轨表面状态对淬火质量的影响,便于生产管理。由于在冷却装置中加入侧面喷风冷却,淬火硬度分布更合理,有利于提高淬火钢轨抗侧磨能力。线路铺设使用也表明,喷风淬火钢轨比喷雾淬火钢轨具有更好的抗剥离性。根据目前国内淬火线生产状况,提出调整钢轨的成分和采用喷风冷却工艺是当前迫切需要解决的问题。     

The effects of federal transit subsidy policy on investment decisions: The case of San Francisco's Geary Corridor

In the United States, federal funding for public transit often accounts for a large proportion of a local agency's budget, especially for capital investments. For this reason, local governments can be expected to plan a portfolio of projects that maximize federal contributions. This study examines the financial effects of federal transit subsidy policy on local transit investment decisions. Data from a System Planning Study for the Geary Corridor in San Francisco are used as an illustration. It is found that federal transit subsidy policy provides financial incentives for local decision-makers to select capital-intensive investment options that may not be efficient or effective. While federal financial incentives are not the only factor influencing local investment decisions, some reform of the current subsidy policy may be necessary to reduce the incentive for ineffective use of public resources.     

公路建设项目征地拆迁补偿费用确定与控制方法研究

文中以广东省公路建设项目征地拆迁费用的确定为例,以现行实施的征地拆迁补偿相关规定为基础,探讨征地数量和标准的计量、计算方法,建立征地拆迁标准动态数据库,以期对征地拆迁费用的确定和控制提供思路和实际操作指导。     

Buckle propagation of damaged SHCC sandwich pipes: Experimental tests and numerical simulation

Sandwich pipe (SP) combining high-strength performance and thermal insulation has been considered an effective solution for oil and gas transportation in ultra-deepwater. Strain hardening cementitious composite (SHCC) is well known for its capacity to withstand both tensile load and external hydrostatic pressure. The sandwich pipe considered in the research is constituted of concentric steel pipes with SHCC annular layer. In the present research work, the SHCC was manufactured, and full scale sandwich pipes were assembled. Intact and damaged specimens were submitted to controlled external pressure in a hyperbaric chamber to obtain the collapse and propagation pressures, respectively. Modeling and simulation of the buckle propagation of the SPs were correlated with the experimental results. The results show that sandwich pipe with SHCC core has an excellent structural strength under high external pressure in both intact and damaged conditions. Moreover, the results also show that the interaction between the annular and the inner/outer pipes provides a significant contribution to the buckling resistance under propagation pressure.     

焊装车间机器人的节拍分析及优化设计

为了实现焊装车间降本增效的目标,对焊装车间自动生产线上机器人的生产节拍进行优化.通过分析机器人的工作时序逻辑,查找机器人不合理的工作时序,进而分析机器人的底层程序,修改程序上的问题,优化工作时序,消除机器人工作时序逻辑不合理产生的等待浪费,提升生产线的生产节拍,从而提高车间的生产效率,最终实现降本增效的目标.     

用贝雷片制作桥梁现浇支架的施工方法

文章依托广西资源-龙胜公路河口-龙胜段桑江大桥箱梁现浇施工实践,介绍了现浇施工过程中利用贝雷桁架作为满堂支架承重结构的施工方法,为桥梁现浇施工提供借鉴。     

带扰动观测器的船舶轨迹跟踪自适应动态面滑模控制

针对遭受未知外部环境扰动的三自由度全驱动船舶轨迹跟踪控制问题,设计一种带扰动观测器的自适应动态面滑模控制方法。该方法构造扰动观测器估计未知扰动,并对控制量进行前馈补偿,采用σ修正泄漏项的自适应律估计扰动观测误差的界以提高控制精度,结合动态面技术解决传统反演法的微分爆炸问题,并选取李雅普诺夫函数证明该控制器可保证闭环系统内所有信号的一致最终有界性。基于一艘供给船舶进行仿真试验,结果表明,所设计的控制器输出合理有效且跟踪精度高,在工程实际中具有一定的参考价值。     

How do economies of density in container handling operations affect ships’ time and emissions in port? Evidence from Norwegian container terminals

Efficient port services are prerequisites for competitive and sustainable maritime transports. This paper makes advances in studying the determinants of the time that ships spend in port and the associated emissions to air. We estimate a production model for cargo handling based on a unique dataset containing each port of call at the largest container terminals in Norway in 2014. In turn, we use auxiliary engine emission factors to estimate particulate matter and nitrogen oxide emissions from ships at berth, to determine how the corresponding damage costs of air pollution vary with container throughput, location, and terminal investments. We find that Norwegian container terminals operate under increasing returns to density. Small ships that unload few containers are far from reaping economies of density, leading to high marginal time requirements for container handling and consequently high marginal external costs. From a Pigouvian taxation perspective, port charges should therefore be regressive in the number of containers handled. Moreover, we find that the external costs of maritime transports are severely understated when port operations are ignored. Our model allows determining the marginal productivities of port facilities. Thereby, it is instrumental in designing port charges that are diversified according to the quantity of containers handled and the service quality (i.e., the speed of handling operations). Regarding contextual factors, we find that establishing high-frequent liner services improves the ship working rate, while simultaneous calls at a terminal impede productivity. The type of container (loading/unloading; empty/laden) also appears to influence the duration of ship working.