考虑围岩蠕变特性的TBM隧道管片衬砌受力特性研究

为研究深部高地应力岩层中修建TBM隧道时管片衬砌结构的力学行为,以某深埋TBM工法隧道为研究对象,建立基于围岩蠕变和管片分块效应的衬砌-围岩复合模型,研究考虑时间效应下管片衬砌的受力特性。结果表明:考虑围岩蠕变效应下管片衬砌受力表现出明显的时间效应。随着围岩蠕变时间的延长,管片衬砌的形变、内力和接缝张开量均呈现两阶段增长,具体表现为前期呈线性增长,后期增加趋缓。洞周围岩应力经历三阶段变化,即先减小后增大直至稳定。围岩蠕变时间为100年时,管片衬砌的内力和形变量均接近极限值。研究结果可为深部高地应力且考虑围岩蠕变效应下的TBM隧道衬砌结构设计提供参考。     

A high order linear model for the prediction of internal lee waves at the main sill of the Strait of Gibraltar

A linear theory for the physical fields in the water column under the action of large amplitude internal lee waves at the main sill of the Strait of Gibraltar is developed. The procedure is a combination of the perturbation and normal modes methods in order to study steady resonant conditions. The lowest order linear approach of the methodology resumes the Taylor–Goldstein equation, which can reconstruct the main features of the observed fields but the high order approach gives the finest structure and sometimes the largest contributions. The role of the non-linear terms is investigated up to the second order taking into account the non-linear interactions between modes, leading to an effective reconstruction of the whole water column for the velocity field.     

航行船舶在浅水水底引起的压力变化

航行船舶在水底引起的压力变化对其自身安全有重要影响。通过船池模型试验研究，总结出了航行船舶水底压力的分布规律，分析了负压峰值的影响因素，提出了水压场换算方法。在浅水、薄船条件下，忽略非线性影响，得到了船舶水压场的简化计算公式，计算结果较好地反映了试验结果的变化规律。     

现代企业内部控制环境浅析

内部控制环境是现代企业内部控制的首要要素,文章首先分析了影响现代企业内部控制环境的因素,然后提出了完善现代企业内部控制环境的建议与措施。     

引水洞圆弧形底拱施工技术研究

在引水洞弧形底拱施工中,气泡、水泡的质量通病一直没有得到很好解决。为确保混凝土内在质量及外观质量,通过几种现行的施工方案分析,研制出横向滑模施工装置,总结出横向滑模施工工艺,成功地解决了施工的难题,为类似工程提供借鉴实例。     

T形沉井基础施工关键技术

沉井基础施工技术在道路交通、房屋建筑施工中经常被采用。但异形沉井基础并不多见,不仅开挖复杂,而且技术难度大。结合国道107线郑州段改建工程泵站施工中应用沉井基础施工技术的成功实践,介绍沉井基础的施工方法、施工工艺和所遇问题的处理方法,为类似工程施工提供有益借鉴。     

内燃机振动动力式主动吸振器的研究

振动主动控制技术具有减振效率高，有效减振频率范围度，反应敏捷等优点，在机械振动领域具有广泛的应用前景。在一台四缸柴油机上进行振动主动控制的研究，使用主动控制技术控制动力吸振式的频率，使其能足够发动机的主动振动频率，并保持最佳状态，从而有效地抑制发动机的振动。     

车身内部布置CAD系统及其应用

介绍了自行开发的汽车车身内部布置的ＣＡＤ系统，并就系统在设计中的应用了说明。该系统是在通用图形软件基础上进行二次开发而成的，以ＳＡＥ标准，ＥＥＣ标准及为主要依据，将ＣＡＤ技术运用到车身内部布置设计中。     

Transport energy consumption in mountainous roads. A comparative case study for internal combustion engines and electric vehicles in Andorra

This paper analyses transport energy consumption of conventional and electric vehicles in mountainous roads. A standard round trip in Andorra has been modelled in order to characterise vehicle dynamics in hilly regions. Two conventional diesel vehicles and their electric-equivalent models have been simulated and their performances have been compared. Six scenarios have been simulated to study the effects of factors such as orography, traffic congestion and driving style. The European fuel consumption and emissions test and Artemis urban driving cycles, representative of European driving cycles, have also been included in the comparative analysis. The results show that road grade has a major impact on fuel economy, although it affects consumption in different levels depending on the technology analysed. Electric vehicles are less affected by this factor as opposed to conventional vehicles, increasing the potential energy savings in a hypothetical electrification of the car fleet. However, electric vehicle range in mountainous terrains is lower compared to that estimated by manufacturers, a fact that could adversely affect a massive adoption of electric cars in the short term.     

25t轴重荷载作用下隧底脱空区域受力特性分析

为了研究在役铁路隧道在通车之后隧底脱空病害的问题,采用有限元理论,建立隧道脱空区域在围岩压力与25 t轴重列车动载作用下的数值计算模型,主要研究80 cm与40 cm脱空宽度分别距隧道中心线0,80 cm与160 cm时脱空区域的受力特性。结果表明:在围岩压力下,脱空区域中线上壁和外侧顶角混凝土中产生拉应力及内侧顶角中产生压应力,其中压应力对脱空的宽度更为敏感;同时施加列车动载作用时,脱空区域上壁出现了竖向动应力与横向拉应力,得到了脱空区域力学指标的最大响应值及其出现的具体位置,宽度的增加对脱空区上壁横向拉应力更为显著,上壁横向拉应力增幅超过200%,竖向动应力增幅达50%。因此,隧底脱空区周围应力分布复杂,拉应力与压应力在脱空区域同时存在,应力突变严重,对脱空现象应及时组织处理。