基于多点线圈联合数据的高速公路匝道影响范围识别

为准确识别高速公路匝道对主线车流的影响等级和范围，本文提出基于速度波动特性的高速公路匝道影响量化方法。通过建立改进加权速度排列熵指标以量化各服务水平下匝道对高速公路主线车流的影响，对建立的指标进行谱聚类分析来确定匝道的影响阈值。应用京昆高速及二广高速的99个平行式合流匝道和直接式分流匝道多点主线线圈检测器数据的分析结果表 明，所提出方法可识别高速公路主线车流受匝道的影响程度。合流匝道对主线最外侧车道的影响比次外侧车道高4%~69%；A~C级服务水平下，分流匝道对上游主线最外侧车道影响程度比次 外侧车道高6%~29%，D~F级服务水平下，最外侧车道受影响程度比次外侧车道低10%~13%。合流匝道的影响范围是合流点上游350m至下游550m；其中上游160m至下游100m和下游180~ 270m为核心影响范围。分流匝道影响范围为分流点至主线上游850m，其中750~850m、450~ 600m、100~300m为核心影响范围。研究成果可为高速公路匝道交通设计、管控策略和提升仿真可靠性提供依据，可有效降低设置匝道带来的影响。     

A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

Estimation of origin‐destination matrices for a multimodal public transit network

This paper presents a procedure for the estimation of origin‐destination (O‐D) matrices for a multimodal public transit network. The system consists of a number of favored public transit modes that are obtained from a modal split process in a traditional four‐step transportation model. The demand of each favored mode is assigned to the multimodal network, which is comprised of a set of connected links of different public transit modes. An entropy maximization procedure is proposed to simultaneously estimate the O‐D demand matrices of all favored modes, which are consistent with target data sets such as the boarding counts and line segment flows that are observed directly in the network. A case study of the Hong Kong multimodal transit network is used to demonstrate the effectiveness of the proposed methodology.     

强风区铁路风沙防治工程最大输沙量与携沙风荷载计算方法

针对强风区铁路风沙流灾害防治工程,开展最大输沙量和强风携沙风荷载2个最关键工程计算问题的研究。结合现场踏勘资料与测试数据,分析风向、风力和持续时间3个影响因素对最大输沙量矢量合成与计算的控制影响,基于优势强风流理论,归纳给出信风型、季风型和对流型3种典型工程风型的输沙量计算方法,并且为准确采集沙样数据,专门设计出能随主风向自动转动的野外自动风导向积沙仪。基于现场测试数据,根据相似准则与量纲和谐原理,推导强风区携沙风单位体积沙砾颗粒流体平均飞跃速度计算公式,用于强风区携沙风冲击荷载计算,计算结果符合工程实际,满足工程计算要求。     

城市轨道交通乘务排班计划方案评价方法

城市轨道交通乘务排班计划是在给定运行图的基础上制定乘务人员的工作计划,其优劣程度对城市轨道交通的运营效率和成本具有显著影响。目前有关乘务排班计划的评价方法方面还缺少深入细致的研究。在借鉴国内外研究成果的基础上,选取相关标准的符合程度、班次间的均衡程度和方案的费用大小这三个方面对城市轨道交通乘务排班计划进行评价,之后采用熵权法确定综合权重来进行综合评价。最后对三个实际方案进行了案例分析,验证了乘务排班计划方案评价方法的可行性。     

基于灰度对比图与最大熵的钢轨图像分割

针对CCD相机采集的钢轨表面图像灰度不均、过度曝光、噪声过大等导致的一维最大熵法无法准确分割缺陷的问题,提出一种将灰度对比图和形态学重构相结合,再用最大熵法进行分割的图像分割算法。首先求得钢轨图像的灰度对比图,接着将灰度对比图经过形态学开-闭重构获得钢轨背景图像,然后将背景图像与灰度对比图相减,得到包含缺陷的差分图,最后将差分图用最大熵法进行分割。实验表明,提出的灰度対比图法能够很好地缓解光照不均,过度曝光对检测带来的影响,形态学开-闭重构不仅能够获得所需的背景模型还能抑制一定的噪声,该算法简单、有效、鲁棒性较高,分割精度可以达到90%。     

汽车急加速噪声信号分析

汽车急加速噪声信号属于短时非平稳信号，在探讨各种时频分析方法的基础上，找到了一种适合于急加速噪声信号的处理方法——短时最大熵谱方法，这将有利于急加速噪声问题的进一步深入研究。     

符号时间序列方法在汽油机燃烧循环变动特征分析中的应用

应用一种新的分析方法———符号时间序列方法对汽油机燃烧循环变动进行了研究。测量得到了某汽油机16种不同工况下的示功图,从提高精度与有利于数据的符号化观点出发,确定以缸内峰值压力作为汽油机燃烧循环变动的表征参数,把符号时间序列分析的具体技术和实施途径应用于试验数据,获得了汽油机燃烧循环变动随转速与负荷的变化规律,提出了利用改进的SHAN NON熵作为汽油机燃烧循环变动的评价指标的新观点。研究结果表明:该方法能较好地应用于汽油机燃烧循环变动特征分析。     

相继增压系统对改善船用直列八缸发动机性能的试验研究

随着大型柴油发动机经济性和排放要求的不断提升,以及对发动机稳态、瞬态特性要求的不断提高,传统的涡轮增压系统已无法满足船用发动机全工况性能的要求。为了提高产品竞争力和适配性,针对某8缸直列船用柴油发动机开发了带有定压排气管的相继增压系统,并进行了发动机台架试验研究。结果表明：发动机中、低转速时,相继增压系统使发动机比油耗可以下降5%-10%,排气温度降低30%-45%,烟度下降55%-60%；最大扭矩可以提升15.1%-36.4%；发动机最大扭矩转速工况突加突卸响应性提升约28%-29%；相继增压系统中定压排气管的设计使得发动机高工况性能也有所提升,从而实现发动机全工况性能的提升。     

Studying the benefits of carpooling in an urban area using automatic vehicle identification data

Carpooling has been considered a solution for alleviating traffic congestion and reducing air pollution in cities. However, the quantification of the benefits of large-scale carpooling in urban areas remains a challenge due to insufficient travel trajectory data. In this study, a trajectory reconstruction method is proposed to capture vehicle trajectories based on citywide license plate recognition (LPR) data. Then, the prospects of large-scale carpooling in an urban area under two scenarios, namely, all vehicle travel demands under real-time carpooling condition and commuter vehicle travel demands under long-term carpooling condition, are evaluated by solving an integer programming model based on an updated longest common subsequence (LCS) algorithm. A maximum weight non-bipartite matching algorithm is introduced to find the optimal solution for the proposed model. Finally, road network trip volume reduction and travel speed improvement are estimated to measure the traffic benefits attributed to carpooling. This study is applied to a dataset that contains millions of LPR data recorded in Langfang, China for 1 week. Results demonstrate that under the real-time carpooling condition, the total trip volumes for different carpooling comfort levels decrease by 32–49%, and the peak-hour travel speeds on most road segments increase by 5–40%. The long-term carpooling relationship among commuter vehicles can reduce commuter trips by an average of 30% and 24% in the morning and evening peak hours, respectively, during workdays. This study shows the application potential and promotes the development of this vehicle travel mode.