船舶柴油机颗粒物排放控制技术研究进展

颗粒物是船舶柴油机排气中的主要污染物,严重危害人体健康和大气环境,如何降低船机颗粒物排放已成为环境保护及柴油机领域的一个重点研究方向。本文对船机排放颗粒物的组分及来源进行分析,梳理论述目前主流的颗粒物排放控制技术及DPF再生技术。认为后处理技术是今后颗粒物排放控制技术研究的重点,其中,最有效、应用最广泛的是DPF技术,复合再生技术是DPF再生过程的发展方向,提出了船机颗粒物排放控制未来需重点研究的关键技术及长远发展目标。     

铁路通信信号电源视频监控技术的应用及分析

结合工程实际,对铁路通信信号电源视频监控系统进行了全面介绍和分析,对工程中存在的问题通过试验分析得出针对性的解决方案,并就铁路电力视频监控技术的发展进行有益的探讨。     

基于MTG的永磁电机启动性能研究

高速永磁电机是MTG发电的关键技术之一，通常采用变频调速的启动方法。高速和高频的特性，决定了高速电机的设计与普通电机有较大的不同。通过建立数学模型，采用仿真的方法可以较准确获得永磁电机的启动性能。     

Investigation of tailpipe and evaporative emissions from China IV and Tier 2 passenger vehicles with different gasolines

The limited understanding of vehicular emissions in China, especially evaporative emissions, is one obstacle to establishing tighter standards. To evaluate tailpipe and evaporative emissions, two typical China IV vehicles and one Tier 2 vehicle with an onboard refuelling vapour recovery (ORVR) system were selected and tested. One of the China IV vehicles was fuelled with gasoline, E10 and M15, respectively, to investigate the effect of fuel properties on vehicular emissions. For each vehicle, cold-start tailpipe emission tests were conducted first, followed by an evaporation test. Based on the emission factors and real-world vehicle activity data, the annual tailpipe and evaporative hydrocarbon (HC) emissions of each vehicle were calculated and compared. The results show that E10 and M15 significantly reduced the tailpipe CO and particle number (PN) emissions but seriously aggravated the NOx emissions, especially for M15. The hot soak losses (HSLs) and diurnal breathing losses (DBLs) were slightly impacted by the fuel properties. The annual evaporative emissions with E10 and M15 were higher than that with gasoline. The ORVR system effectively controlled the evaporative emissions, especially for DBLs. Evaporative emissions from the China IV vehicles were 1.1–1.4 times the tailpipe HC emissions. Additionally, the evaporative emission factors of the China IV vehicles were almost 50% lower than the standard (2.0 g/test), whereas their annual evaporative emissions were almost 1.8–2.8 times higher than those from the Tier 2 vehicle. Therefore, controlling evaporative emissions currently remains a great need in China, and the ORVR might be a recommended evaporative control technology.     

Estimation of extreme significant wave heights and the associated uncertainties: A case study using NORA10 hindcast data for the Barents Sea

The reliability of an offshore structure is dependent on its response to the extreme wave climate; therefore, an adequate knowledge of the wave climate at a location is a prerequisite during design as well as in marine operations. This study aims to contribute to the knowledge of the extreme wave climate in the Norwegian Sector of the Barents Sea, using wave hindcast datasets from the Norwegian Reanalysis 10 km (NORA10) database for four locations.We have considered three commonly used methods for the estimation of extreme wave heights, that is, the initial distribution method, the peak over threshold method, and the annual maxima method. The parametric bootstrap concept is considered in the estimation of the epistemic uncertainty related to sample size. The estimated 100-year significant wave heights obtained from the three methods differ, and the degree of variability in the estimates varies, depending on the dataset. The epistemic uncertainty due to sample size is wider when considering the annual maxima method.The estimates obtained from the three methods show the importance of considering different methods and their associated uncertainties when estimating extreme wave values for design. While it is difficult to single out the best method among the three, the estimated values give knowledge of the possible range of the extreme significant wave heights at the locations. Generally, the datasets considered in this study suggest that the wave climate is less harsh further north compared to the southern region of the Barents Sea. The datasets do not suggest any temporal trends in the historical significant wave heights at any of the locations.     

大鼠弥漫性轴索损伤后大脑皮层rab10的表达及意义

目的研究大鼠弥漫性轴索损伤(diffuse axonal injury,DAI)后小G蛋白rab10在大脑皮层的表达变化规律,探讨DAI后rab10在神经修复中的作用及意义。方法采用头颅瞬间旋转损伤装置建立大鼠DAI模型,随机分为1d、3d、7d组及对照组。采用Gless嗜银染色和TUNEL染色分别观察DAI后神经轴索形态和凋亡变化;采用Western blot、免疫组化等方法检测大鼠大脑皮层rab10的分布及表达,并采用免疫荧光双标染色分析大脑皮层神经元内rab10的表达变化。结果嗜银染色显示DAI后1d神经轴索形态损伤最严重,3~7d时损伤逐渐减轻;TUNEL染色显示DAI后1d凋亡细胞数开始升高,3~7d时凋亡数量更高,呈迟发性改变。Western blot及免疫组化结果均提示DAI后1d大脑皮层rab10的表达显著增加,3d后稍降低,7d后明显降低,但仍高于正常(P<0.05);免疫荧光双标染色提示正常神经元内几乎不表达rab10,DAI后神经元内rab10表达在1~3d较高,7d时较前降低。结论大鼠DAI后大脑皮层rab10表达水平先增加,随后降低;神经元内rab10的表达变化可能与DAI后神经轴索修复有关。     

弥漫性轴索损伤后CD4~+/CD8~+ T细胞比值、IL-6、IL-10水平变化及预后相关危险因素的Logistic回归分析

目的研究弥漫性轴索损伤(DAI)后患者外周血CD4+/CD8+T细胞比值及炎症因子IL-6、IL-10水平的变化,探讨影响DAI患者预后的相关危险因素及可能的预测因子。方法收集115例DAI患者的相关临床资料及伤后至少6个月的随访结果,并将采集的患者外周血采用流式细胞仪检测CD4+、CD8+T细胞及其比值,ELISA法检测IL-6、IL-10水平,对免疫炎症指标及临床资料进行单因素和多因素分析,多因素分析采用Logistic回归分析。结果DAI后合并其他脑损伤、瞳孔改变、伤后昏迷时间及入院时GCS评分是影响患者预后的危险因素,而其他因素则与预后不相关。CD4+/CD8+T淋巴细胞比值降低是DAI后发生ARDS/ALI的危险因素,CD4+/CD8+T淋巴细胞比值与患者预后关系不大,而ARDS/ALI的发生则是影响DAI患者预后的重要危险因素。IL-6增加与DAI后ARDS/ALI密切相关,可作为ARDS/ALI发生的预测因子,其水平是患者预后的危险因素,而IL-10则在此过程中与ARDS/ALI不相关,且与患者预后无关。结论 CD4+/CD8+T淋巴细胞比值降低是DAI后发生ARDS/ALI的危险因素,IL-6可作为ARDS/ALI发生的预测因子。DAI后与患者预后相关的危险因素包括合并其他脑损伤、瞳孔改变、伤后昏迷时间、入院时GCS评分、IL-6水平及并发ARDS/ALI。     

焊前预处理对AlSi10MgMn真空压铸件与铝型材MIG焊接气孔的影响

AlSi10MgMn真空压铸铝合金在MIG焊接存在气孔,其连接方式的选择一定程度上受限,通过对Al?Si10MgMn真空压铸铝合金和型材件进行焊前预处理(氧化皮打磨、酒精清洗、预热处理)后进行MIG焊接,分析了该方案对于焊接气孔的改善效果,结果发现焊前预处理对AlSi10MgMn真空压铸铝合金和型材件MIG焊接气孔改善效果明显,焊缝接头剖面平均气孔率由1.14%降低为0.73%,同时发现焊缝接头剖面中心区域显微硬度值最高,接头强度为180 MPa,接头效率为75%,焊前预处理对显微硬度和接头强度基本无影响。     

Efficiency evaluation and PM emission reallocation of China ports based on improved DEA models

The emission of particulate matter (PM) and other atmospheric pollutants in port operations and shipping have caused a huge negative impact on the environment. Consequently, how to evaluate the environmental efficiency of ports and put forward corresponding countermeasures on this basis is becoming a more important issue than ever before from the perspectives of the government, academia, and society. We construct three data envelopment analysis (DEA) models to evaluate the environmental efficiency of ports under the circumstances of environmental control, non-environmental control and PM emission through inter-ports cooperation. The innovation of the DEA models constructed in this paper lies in: (1) Setting environmental control parameters to uniformly manipulate the situations of environmental control and non-environmental control, etc.; (2) Allowing non-equal proportional change of input index, expected output and non-expected output index; (3) Setting preference coefficients for ports to admit favorable decisions; (4) Providing a distance formula of expected output for PM emission reallocation. Further, data from 11 major ports in China are collected to compare the expected output under different PM emission standards assuming the situation of environmental control and non-environmental control, port cooperation, and non-cooperative sewage discharge. The empirical results show that: (1) Ports in the eastern China (Shanghai, Ningbo, and Nanjing) have higher port efficiency; (2) Port cooperation can improve the overall expected output but it will lose its edge with the improvement of PM emission standards. (3) Ports follow the same trend of output loss regardless of favorable decisions. In the end, the author makes a summary, puts forward relevant policy suggestions and makes the recommendation for future research.     

STCW78/10公约对航海技术专业人才培养的影响及对策

在概述STCW78/10公约对航海技术专业人才培养产生较大影响的基础上,本文介绍了我国履约的准备情况,提出航海技术专业人才培养应从培养模式、培养途径、培养规格、课程体系和教学手段与方法五个方面进行调整和改革的措施,以应对公约修改对航海人才培养的影响.