基于改进粒子群优化算法的鲁棒性列车运行图编制方法

以列车优先级、追踪运行间隔时间和连发间隔时间限制为约束条件,以旅客列车的走行公里总数、平均旅行速度、对标准计划的延迟总时间和延迟时间方差,以及货物列车的日车公里总数和日产最6个指标无量纲转化后的合计值最大为综合目标函数,建立列车运行图编制优化模型.为增加列车运行图的鲁棒性,引入虚拟车和缓冲时间槽2个参数,采用改进的粒子群优化算法给出鲁棒性列车运行图编制方法.以5个车站、5列旅客列车和7列货物列车构造模拟环境,采用该方法进行列车运行图编制模拟.结果表明:该方法可铺画出更优的列车运行图,计算效率高;在行车计划受到扰动后,虚拟车和缓冲时间槽释放资源,运行图可以较快地恢复到可接受范围,容错鲁棒性好.     

A generic data assimilation framework for vehicle trajectory reconstruction on signalized urban arterials using particle filters

With trajectory data, a complete microscopic and macroscopic picture of traffic flow operations can be obtained. However, trajectory data are difficult to observe over large spatiotemporal regions—particularly in urban contexts—due to practical, technical and financial constraints. The next best thing is to estimate plausible trajectories from whatever data are available. This paper presents a generic data assimilation framework to reconstruct such plausible trajectories on signalized urban arterials using microscopic traffic flow models and data from loops (individual vehicle passages and thus vehicle counts); traffic control data; and (sparse) travel time measurements from whatever source available. The key problem we address is that loops suffer from miss- and over-counts, which result in unbounded errors in vehicle accumulations, rendering trajectory reconstruction highly problematic. Our framework solves this problem in two ways. First, we correct the systematic error in vehicle accumulation by fusing the counts with sparsely available travel times. Second, the proposed framework uses particle filtering and an innovative hierarchical resampling scheme, which effectively integrates over the remaining error distribution, resulting in plausible trajectories. The proposed data assimilation framework is tested and validated using simulated data. Experiments and an extensive sensitivity analysis show that the proposed method is robust to errors both in the model and in the measurements, and provides good estimations for vehicle accumulation and vehicle trajectories with moderate sensor quality. The framework does not impose restrictions on the type of microscopic models used and can be naturally extended to include and estimate additional trajectory attributes such as destination and path, given data are available for assimilation.     

Preliminary investigation of PM1, PM2.5, PM10 and its metal elemental composition in tunnels at a subway station in Shanghai,China

In this study, real-time monitoring campaigns were conducted in two tunnels (Line A and Line B) at a subway station in Shanghai, including temperature, relative humidity, PM₁, PM_2.5 and PM₁₀, in order to understand the climate and PM characteristics in the transportation microenvironment. In addition, collected floor dust particles in the tunnel were analyzed by ICP for their metal elemental composition. Strong correlations occurred between all PM levels and meteorological parameters in the tunnel of Line A (with platform screen doors), in comparison with the weak correlations between such parameters in the tunnel of Line B (without platform screen doors). PM_2.5 and PM₁₀ between peak hours and off-peak hours for both lines presented significant differences (p < 0.05), respectively. Nevertheless, PM₁ showed a different pattern, with p > 0.05 for Line A and p < 0.05 for Line B, respectively. In addition, statistical results concluded that PM had an evident weekly variation for both lines. Friday was the highest day of all particulate matters in monitoring periods for both lines. Ratios of PM₁/PM₁₀ and PM_2.5/PM₁₀ were high when trains were out of service and low when trains were in service. Relative abundance of metal elements detected from floor dust particles proved that floor dust particles in tunnels might be a major source of airborne PM in the subway microenvironments, with Fe as the most abundant metal element, followed by Ca, Al, Mg, Mn, Zn, Cu, Cr, Ni, Pb and Hg.     

Integrated solution for anomalous driving detection based on BeiDou/GPS/IMU measurements

There has been an increasing role played by Global Navigation Satellite Systems (GNSS) in Intelligent Transportation System (ITS) applications in recent decades. In particular, centimeter/decimetre positioning accuracy is required for some safety related applications, such as lane control, collision avoidance, and intelligent speed assistance. Lane-level Anomalous driving detection underpins these safety-related ITS applications. The two major issues associated with such detection are (1) accessing high accuracy vehicle positioning and dynamic parameters; and (2) extraction of irregular driving patterns from such information. This paper introduces a new integrated framework for detecting lane-level anomalous driving, by combining Global Positioning Systems (GPS), BeiDou, and Inertial Measurement Unit (IMU) with advanced algorithms. Specifically, we use Unscented Particle Filter (UPF) to perform data fusion with different positioning sources. The detection of different types of Anomalous driving is achieved based on the application of a Fuzzy Inference System (FIS) with a newly introduced velocity-based indicator. The framework proposed in this paper yield significantly improved accuracy in terms of positioning and Anomalous driving detection compared to state-of-the-art, while offering an economically viable solution for performing these tasks.     

隧道下穿运营机场跑道的爆破振动安全判据研究

以我国第一座采用钻爆法下穿运营机场跑道的隧道恩施金凤大道许家坪隧道工程为依托,开展对机场跑道的爆破动力安全判据的研究。首先基于应力波传播理论及极限拉应力准则,对爆炸应力波传播至机场跑道上表面(即自由面)处发生的反射进行理论分析,建立基于混凝土跑道结构安全的爆破振动速度判据模型,并提出跑道的爆破振动速度安全阈值;同时,基于数值模拟,从统计角度建立拉应力峰值与质点振动速度峰值之间的函数关系,求解得到机场跑道的爆破振动速度安全阈值。最后,将理论分析结果、数值计算分析与《爆破安全规程》进行对比分析,最终确定机场跑道的爆破振动速度安全判据,为在隧道下穿机场跑道爆破施工提供了依据。     

Efficient multiple model particle filtering for joint traffic state estimation and incident detection

This article proposes an efficient multiple model particle filter (EMMPF) to solve the problems of traffic state estimation and incident detection, which requires significantly less computation time compared to existing multiple model nonlinear filters. To incorporate the on ramps and off ramps on the highway, junction solvers for a traffic flow model with incident dynamics are developed. The effectiveness of the proposed EMMPF is assessed using a benchmark hybrid state estimation problem, and using synthetic traffic data generated by a micro-simulation software. Then, the traffic estimation framework is implemented using field data collected on Interstate 880 in California. The results show the EMMPF is capable of estimating the traffic state and detecting incidents and requires an order of magnitude less computation time compared to existing algorithms, especially when the hybrid system has a large number of rare models.     

Numerical simulation of wave-induced nonlinear motions of a two-dimensional floating body by the moving particle semi-implicit method

The moving particle semi-implicit (MPS) method was applied to compute nonlinear motions of a floating body influenced by the water on deck. To compute the motions of a rigid body, the fluid pressure at the position of each particle on the body surface was directly integrated in space and the equations of translational and rotational motions were integrated in time to determine the correct position of the rigid-body surface at each time step of the time-domain calculation. The performance of this method was validated through a comparison with measured results in an experiment that was newly conducted using a model of a box-shaped floating body with a small freeboard. Although the overall agreement was good, some discrepancies were observed for a shorter wave period, especially for the drift motion in sway. The effect of numerical resolution on the results was checked by changing the number of particles. With a higher number of particles, no obvious improvement was seen in the global body motions, but the resolution of the local free-surface profile, including the water on deck, was improved.     

基于粒子群算法的动力定位推力分配决策变量优选

针对群智能算法解决动力定位推力分配问题易陷入局部最优、计算时间长等不足,基于粒子群算法探索不同粒子决策变量对推力分配结果的影响。首先考虑推力分配目标力和力矩、推力限制、禁止角等约束条件,以推进器功率最优、磨损最小为优化目标建立了推力分配数学模型,构建了基于三种不同粒子决策变量的粒子群推力分配算法;其次以算法结果的适应度值、计算消耗时间的均值和方差量化算法的收敛性和实时性,对上述三种方法进行了仿真分析,仿真结果对比表明,基于本文提出的粒子决策变量搜索在收敛性和实时性上均达到最优,对粒子群算法解决推力分配问题有一定的参考价值。     

液舱内不同结构形式对晃荡的影响分析

采用光滑粒子水动力学法( SPH)对二维晃荡问题进行了计算和分析.研究了“I”型和“T”型2种结构形式对矩形液舱内液体晃荡的抑制效果.通过对不同隔板尺寸的对比研究,得到了隔板高度和宽度对晃荡的影响作用.数值分析结果表明,“I”型和“T”型种防晃结构在高度为水深的60％～80％时具有很好的防晃效果.对于“T”型防晃结构,...     

光滑质点流体动力学(SPH)及其算法特性

基于Lagrange观点的无网格方法计算是建立在一群可移动的自适应性的质点基础之上,对特大变形区域和自由表面的捕捉有着较高的精度.光滑质点流体动力学(SPH)是无网格方法的一种,本文阐述其理论基础和计算方法,主要包括:SPH的基本概念、核近似和粒子近似的基本原理,核函数的构造方法、SPH形式的流体运动方程、边界处理方法和数值算例等多方面内容.研究工作在了解SPH方法的理论特点和潜在优势的同时,也为相关问题的深入研究和改进奠定了理论和算法基础.