公共自行车使用时空特性挖掘及租还需求预测

基于宁波市公共自行车刷卡数据、POI(Point of Interest)数据、气象和空气质量等数据，从数据驱动视角，深入挖掘公共自行车使用的时空特征及站点租还车需求预测。在时间上，采用KMeans算法，将站点聚为5类，探讨各类站点的时变需求规律及影响因素；在空间上，提出基于POI 数据的站点用地类型识别方法，将站点分为居住类、交通设施类、办公类和商业休闲类。构建以 15，30，60 min 为间隔，以租还车需求为目标变量的随机森林预测模型，并与常用的 BP (Back Propagation)神经网络、K最近邻方法进行比较。结果表明，随机森林模型的精度更高，适用性更强。以30 min为间隔的站点租还车需求预测精度最高，考虑站点土地利用类型后能有效提高模型的预测精度。本文结果可作为未来站点平衡调度的依据并推广应用于共享单车系统，为改善服务水平提供技术和理论支撑。     

城市中心区停车设施供应研究

随着城市化进程的加快，我国机动车拥有量及道路交通量急剧增加，停车问题已成为诸多城市的难题。本文在分析了城市中心区停车设施供应的影响因素的基础上，建立了停车设施供应与停车需求关系模型以及停车设施供应与路网容量平衡关系模型，对如何合理确定城市中心区停车泊位供应量进行了探讨，并在浙江省台州市滨海工业城启动区块的停车设施供应规划中得到应用，可为我国城市中心区静态交通设施规划提供借鉴。     

交通需求OD估计与预测的现状研究分析

目前，对于静态OD矩阵估计问题已经有很多研究者，对于动态OD前沿的研究工作则非常有限。关于对OD估计和预测的研究可分为封闭网络和开放网络。介绍了研究封闭网络的Bell，Van der Zijpp，Chang and Wu和Chang and Tao等人的方法，以及研究开放网络动态估计的3种方法，即Cascetta、Okutani、Ashok和Ben—Akiva等人的方法。并指出可以将OD估计问题陈述为具有不同误差特性、多个来源的不同类型信息的综合性和一致性的结合体，此联合估测就是经济计量学的混合估计的问题。     

超灵便型多用途船舶的开发和设计

主要介绍了灵便型多用途船舶市场需求的趋势以及其设计理念。这一新理念的3万吨级多用途船被命名为"超灵便"型,4家中国船厂迄今收到了总共22艘该型船舶的订单,另有许多其他船舶公司表达了今后订购的意向。     

Aggregate expenditure elasticity for transport and communication in Australia

For the purpose of estimating Engel elasticity, one needs to find the best functional form among various alternatives. In this paper, a new function, which is called the double semi-log Engel function turns out to be the best functional form for the transport and communication items in Australia on the basis of the distance function (D²) criterion, and the non-nested hypothesis testing procedure. This function is then used to estimate total expenditure elasticity, and the percentage change in consumer demand due to changes in total expenditure and total expenditure inequalities; using the 1975–76 Household Expenditure Survey data. The results of the analyses demonstrate that transport and communication is a necessary item in Australia on the basis of two criteria, viz., its elasticity is not significantly greater than unity, and the percentage change in demand increases with a decrease of the total expenditure inequality [emphasised by Iyengar (I960)]. Policy implication of the analyses has also been discussed.     

Estimation of value of travel time reliability

In mode choice decision, travelers consider not only travel time but also reliability of its modes. In this paper, reliability was expressed in terms of standard deviation and maximum delay that were measured based on triangular distribution. In order to estimate value of time and value of reliability, the Multinomial and Nested Logit models were used. The analysis results revealed that reliability is an important factor affecting mode choice decisions. Elasticity is used to estimate the impacts of the different policies and system improvements for water transportation mode. Among these policies, decision maker can assess and select the best alternative by doing the benefit and cost analysis based on a new market share, the value of time, and the value of reliability. Finally, a set of promising policies and system improvement of the water transportation were proposed.     

Ramp meters on trial: Evidence from the Twin Cities metering holiday

Ramp meters in the Twin Cities have been the subject of a recent test of their effectiveness, involving turning them off for eight weeks. This paper analyzes the results with and without ramp metering for several representative freeways during the afternoon peak period. Seven performance measures: mobility, equity, productivity, consumers’ surplus, accessibility, travel time variation and travel demand responses are compared. It is found that ramp meters are particularly helpful for long trips relative to short trips. Ramp metering, while generally beneficial to freeway segments, may not improve trip travel times (including ramp delays). The reduction in travel time variation comprises another benefit from ramp meters. Non-work trips and work trips respond differently to ramp meters. The results are mixed, suggesting a more refined ramp control algorithm, which explicitly considers ramp delay, is in order.     

旅游路网规划评价指标体系研究

在对旅游路网进行分析的基础上,从技术性能、社会效益、经济效益、环境效益4个方面进行研究,建立了旅游路网规划的评价指标体系,并对各项指标的含义进行探讨,分析了各指标值的确定方法,进而能方便地运用这些指标进行旅游路网规划的评价。     

需求不均衡的制梁台座规模优化算法改进研究

根据箱梁预制工艺的要求,模具的周转周期T2通常为3～5 d,而文献[1]中制梁台座规模优化算法仅适合于模具的周转周期T2=1 d的情况。针对文献[1]的局限性,试图通过作图、试算和归纳等一系列工作,找出适用于T2=[1,T1]时计算最优制梁台座数和模具数的通用算法,进一步扩大了算法的适用性。同时,结合文献[1]的工程实例,利用Matlab语言编程验证了改进算法的可行性。     

长江经济带沿江铁路通道规划建设必要性分析

长江经济带发展正式上升为国家战略。沿江铁路通道横跨我国长江经济带,是我国长江经济带发展战略的支撑性通道。以沿江通道区位特征、产业布局、经济特征为依据,通过分析沿江铁路通道的发展现状、存在问题,通道内不同时期铁路运输需求,以及对拟建项目的功能定位进行分析,从而提出沿江铁路通道规划建设的必要性。