关于铁路光传输工程色度色散指标的研究

针对铁路光传输系统,阐述了光纤色散指标对传输系统技术性能的影响,建议修改现行光缆线路工程验收标准的有关规定,增加光纤色度色散指标验收测试项目,有效保证高速铁路传输系统的质量要求。     

Traffic modelling in system boundary expansion of road pavement life cycle assessment

This paper uses a case study of a UK inter-urban road, to explore the impact of extending the system boundary of road pavement life cycle assessment (LCA) to include increased traffic emissions due to delays during maintenance. Some previous studies have attempted this but have been limited to hypothetical scenarios or simplified traffic modelling, with no validation or sensitivity analysis. In this study, micro-simulation modelling of traffic was used to estimate emissions caused by delays at road works, for several traffic management options. The emissions were compared to those created by the maintenance operation, estimated using an LCA model. In this case study, the extra traffic emissions caused by delays at road works are relatively small, compared to those from the maintenance process, except for hydrocarbon emissions. However, they are generally close to, or above, the materiality threshold recommended in PAS2050 for estimating carbon footprints, and reach 5–10% when traffic flow levels are increased (hypothetically) or when traffic management is imposed outside times of lowest traffic flow. It is recommended, therefore, that emissions due to traffic disruption at road works should be included within the system boundary of road pavement LCA and carbon footprint studies and should be considered in developing guidelines for environmental product declarations of road pavement maintenance products and services.     

飞机防冰腔结构参数的重要性测度

分析了常见的3种飞机防冰腔结构,应用Gambit软件建立了双蒙皮防冰腔结构网格模型。采用Spalart-Allmaras湍流模型模拟热气在防冰腔内的流动状况,采用Fluent软件进行传热效率分析,建立了防冰腔结构参数对传热效率的重要性测度模型。通过随机响应面法建立防冰腔结构参数与传热效率的函数关系,采用低分散性抽样法求解防冰腔结构参数的重要性测度,建立了防冰腔结构参数的重要性测度分析流程。分析结果表明:当笛形管中心到外蒙皮的距离从35.15mm增加到38.85mm时,传热系数由0.505减小到0.463;当双蒙皮通道高度从2.85mm增加到3.15mm时,传热系数由0.495减小到0.476;当射流孔孔径从1.90mm增加到2.10mm时,传热系数从0.505减小到0.494;当射流孔角度从14.25°增加到15.75°时,传热系数从0.476增加到0.494。防冰腔结构参数的重要性排序依次为射流孔角度、笛形管中心到外蒙皮距离、射流孔孔径、双蒙皮通道高度,在防冰腔结构加工与装配过程中,需要重点考虑射流孔角度与笛形管中心到外蒙皮距离这2个参数。     

混行非机动交通流车速离散特性研究

我国城市非机动道路内的交通现象通常为电动自行车与人力自行车混合行驶状况,车速离散是该类道路内交通流的重要特征。结合杭州市的调查数据,采用统计学方法定量分析混合非机动交通流车速离散特性,分别建立车速离散特性评价参数与各主要影响因素之间的回归关系。结果表明,归一化车速离散度分别与各影响因素成线性回归关系;除电动自行车比例因素之外,车速变异系数与其它各因素成线性回归关系。     

Accelerated vehicle retirement program: Estimating the optimal incentive payment in Israel

The paper analyzes two main aspects of the accelerated vehicle retirement program in Israel: the optimal incentive payment of private cars, and the feasibility of expanding the program to include light commercial vehicles. The benefits are the reduction of pollutant emissions and safety benefits, which were compared to the costs of the incentive payment. A differential payment scheme for private vehicles according to the vehicle’s age, is shown to have a higher net benefit than a uniform payment scheme. It is also found that the optimal payment is higher than the existing incentive payment. Additionally, it is found economically feasible to include light commercial vehicles in the program.     

公路安全保障工程对下坡急弯路段车辆运行特征影响分析

为指导公路安全保障工程的深入开展，进行了大量追踪工作。选定国道108某路段，对公路安全保障工程前后下坡急弯路段车辆运行特征数据进行了观测，主要包括公路安全保障工程实施前后事故情况、车速情况、刹车点位置情况等。基于对上述观测数据的分析，发现在该下坡上公路安全保障工程的实施使得车辆运行特征发成了变化，标志、薄层铺装等设施都起到了预期的安全效果。最后，对薄层铺装等设施的合理设计提出建议。     

水泥稳定粒料水泥剂量EDTA滴定方法的研究

水泥剂量对水泥稳定粒料路面基层材料性能的影响较大.由于一些试验工作者对试验方法的理解程度和操作水平的差异,水泥剂量的试验结果存在较大的离散,难以起到控制生产质量的目的.对EDTA滴定法的原理进行了阐述,并研究了影响EDTA滴定法数据离散性的因素.研究表明:用2.36 mm粒径以下颗粒绘制的标准曲线离散比较小,不同粒级颗粒的EDTA消耗量相差很大,取样的代表性是试验成功的关键.就此,提出了一种取样方式,大幅度降低了EDTA滴定法测试水泥剂量的离散性,增大了水泥剂量滴定值的可信度.     

纤维加筋沥青混合料的设计与施工要点

加筋纤维可以明显提高沥青混合料的各项性能,在经济条件许可的前提下,可适当推广,但在应用过程中应加强设计与施工等方面的控制。从纤维的技术要求、纤维分散性、配合比设计要求及施工控制要点等方面进行了阐述,以期给广大工程技术人员提供参考。     

Improving pollutant emissions in diesel engines for heavy-duty transportation using retarded intake valve closing strategies

A combined theoretical and experimental study has been carried out to determine the real potential of reducing pollutant emissions in a HD diesel engine by means of retarding the intake valve closing. The effects produced by this alteration of the basic operation cycle have been examined by a preliminary modelling study, and from the obtained results, a modified camshaft was manufactured with a delayed intake valve closing of 60 crank angle degrees. Single-cylinder engine tests were carried out with this modified camshaft, and the emissions and fuel consumption were recorded. The results showed that the retarded intake valve closing can enhance the premixed combustion phase, and thus simultaneously reduce soot and NOx emissions. Moreover, the combustion process attained is extremely tolerant to exhaust gas recirculation, and by adoption of this measure, Euro-5 emissions limits can be achieved at the tested conditions without after-treatment.     

二尖瓣脱垂综合征患者QT离散度分析

测定了30例二尖瓣脱垂综合征伴室性心律失常患者的QTd。结果发现，二尖瓣脱垂组QTd、QTcd、JTd显著延长，说明心室肌复极有局部的不均一性和电不稳定性，离散度与室性心律失常的发生密切相关，可能是室性心律失常发生的机理之一。QTd不仅能预测室性心律失常及猝死，而且能指导临床用药，是一很好的临床观察指标。