Analytical and simulation approaches to understand combined effects of transit signal priority and road-space priority measures

Transit signal priority (TSP) may be combined with road-space priority (RSP) measures to increase its effectiveness. Previous studies have investigated the combination of TSP and RSP measures, such as TSP with dedicated bus lanes (DBLs) and TSP with queue jump lanes (QJLs). However, in these studies, combined effects are usually not compared with separate effects of each measure. In addition, there is no comprehensive study dedicated to understanding combined effects of TSP and RSP measures. It remains unclear whether combining TSP and RSP measures creates an additive effect where the combined effect of TSP and RSP measures is equal to the sum of their separate effects. The existence of such an additive effect would suggest considerable benefits from combining TSP and RSP measures. This paper explores combined effects of TSP and RSP measures, including TSP with DBLs and TSP with QJLs. Analytical results based on time-space diagrams indicate that at an intersection level, the combined effect on bus delay savings is smaller than the additive effect if there is no nearside bus stop and the traffic condition in the base case is under-saturated or near-saturated. With a near-side bus stop, the combined effect on bus delay savings at an intersection level can be better than the additive effect (or over-additive effect), depending on dwell time, distance from the bus stop to the stop line, traffic demand, and cycle length. In addition, analytical results suggest that at an arterial level, the combined effect on bus delay savings can be the over-additive effect with suitable signal offsets. These results are confirmed by a micro-simulation case study. Combined effects on arterial and side-street traffic delays are also discussed.     

Spatial impacts of road pricing: Accessibility, regional spillovers and territorial cohesion

Road pricing policies are gaining prominence in EU countries. These policies have positive impacts leading to mobility patterns which are socially and environmentally more desirable, but they also have negative impacts. One negative impact is to be found in regional accessibility, due to the increase in generalized transport costs. This study presents a methodology based on accessibility indicators and GIS to assess the accessibility impacts of a road pricing policy. The methodology was tested for the Spain’s road network considering two road pricing scenarios. It enables not only the more penalized regions to be identified but also negative road pricing spillover effects between regions. These effects are measured in terms of accessibility changes occurring in one region produced by charges implemented in another region. Finally, the study of accessibility disparities (by calculating inequality indexes for each of the scenarios considered), provides policymakers with useful information regarding the impact of road pricing policies from the point of view of territorial cohesion.     

Variable speed limit control for severe non-recurrent freeway bottlenecks

Variable speed limit (VSL) schemes are developed based on the Kinematic Wave theory to increase discharge rates at severe freeway bottlenecks induced by non-recurrent road events such as incidents or work zones while smoothing speed transition. The main control principle is to restrict upstream demand (in free-flow) progressively to achieve three important objectives: (i) to provide gradual speed transition at the tail of an event-induced queue, (ii) to clear the queue around the bottleneck, and (iii) to discharge traffic at the stable maximum flow that can be sustained at the bottleneck without breakdown. These control objectives are accomplished without imposing overly restrictive speed limits. We further provide remedies for (a) underutilized bottleneck capacity due to underestimated stable maximum flow and (b) a re-emergent queue at the bottleneck due to an overestimated stable maximum flow. We analytically formulate the reductions in total delay in terms of control parameters to provide an insight into the system performance and sensitivity. The results from the parameter analysis suggest that significant delay savings can be realized with the proposed VSL control strategies.     

铁路应急平台中数据传输机制研究与实现

分析铁路应急平台数据传输需求,提出一种以JWMQ为通信平台,以XML为数据载体的模型,有效解决三级平台之间以及应急平台与外部系统数据传输需求.     

我国区域出口贸易技术外溢的实证研究

基于两部门模型,利用面板数据的似无关方法估计1992—2007年我国东部区域、中部区域、西部区域出口贸易对经济增长的技术外溢效应。结果表明:3个区域的出口贸易主要是通过更有效率地利用出口部门生产要素和出口部门对非出口部门的正向技术外溢而对经济增长产生积极影响。并且,东部区域出口部门的技术外溢效应相对更高,而中部、西部区域出口部门的生产率相对更高。     

Simple analytical models for estimating the queue lengths from probe vehicles at traffic signals

As mobile traffic sensor technology gets more attention, mathematical models are being developed that utilize this new data type in various intelligent transportation systems applications. This study introduces simple analytical estimation models for queue lengths from tracked or probe vehicles at traffic signals using stochastic modeling approach. Developed models estimate cycle-to-cycle queue lengths by using primary parameters such as arrival rate, probe vehicle proportions, and signal phase durations. Valuable probability distributions and moment generating functions for probe information types are formulated. Fully analytical closed-form expressions are given for the case ignoring the overflow queue and approximation models are presented for the overflow case. Derived models are compared with the results from VISSIM-microscopic simulation. Analytical steady-state and cycle-to-cycle estimation errors are also derived. Numerical examples are shown for the errors of these estimators that change with probe vehicle market penetration levels, arrival rates, and volume-to-capacity ratios.     

信号交叉口车辆拖延行为分析

在分析HCM2000 Back of Queue模型计算值偏大的原因中,提出了信号交叉口车辆拖延行为的概念,分析了拖延行为导致Back of Queue模型偏大的2种情况。建立了车辆拖延行为3阶段模型,重点推导了拖延行为模型中,低匀速行驶的时间与不发生拖延行为的正常状况下的停车等待时间之间的关系。根据统计分析,确定低匀速行驶的速度和时间的取值范围,在此基础上推导出车辆发生拖延行为的最大时间间隔Tmax,以及车辆发生拖延行为的条件。讨论了Tmax在考虑拖延行为的排队模型中的应用,是对考虑拖延行为的Back of Queue模型研究的进一步深化。     

Arterial travel time estimation based on vehicle re-identification using wireless magnetic sensors

A practical system is described for the real-time estimation of travel time across an arterial segment with multiple intersections. The system relies on matching vehicle signatures from wireless sensors. The sensors provide a noisy magnetic signature of a vehicle and the precise time when it crosses the sensors. A match (re-identification) of signatures at two locations gives the corresponding travel time of the vehicle. The travel times for all matched vehicles yield the travel time distribution. Matching results can be processed to provide other important arterial performance measures including capacity, volume/capacity ratio, queue lengths, and number of vehicles in the link. The matching algorithm is based on a statistical model of the signatures. The statistical model itself is estimated from the data, and does not require measurement of ‘ground truth’. The procedure does not require measurements of signal settings; in fact, signal settings can be inferred from the matched vehicle results. The procedure is tested on a 1.5 km (0.9 mile)-long segment of San Pablo Avenue in Albany, CA, under different traffic conditions. The segment is divided into three links: one link spans four intersections, and two links each span one intersection.     

MQ软件在TMIS应用中存在的问题及解决方法

Message Queue(MQ)作为应用和网络之间的界面,实现了信息的异步传输,同时也保证了信息的可靠性.针对MQ的特点,介绍了MQSeries软件在铁路计算机系统中的应用和维护.     

Automated cars: Queue discharge at signalized intersections with ‘Assured-Clear-Distance-Ahead’ driving strategies

This study addresses the impacts of automated cars on traffic flow at signalized intersections. We develop and subsequently employ a deterministic simulation model of the kinematics of automated cars at a signalized intersection approach, when proceeding forward from a stationary queue at the beginning of a signal phase. In the discrete-time simulation, each vehicle pursues an operational strategy that is consistent with the ‘Assured Clear Distance Ahead’ criterion: each vehicle limits its speed and spacing from the vehicle ahead of it by its objective of not striking it, regardless of whether or not the future behavior of the vehicle ahead is cooperative. The simulation incorporates a set of assumptions regarding the values of operational parameters that will govern automated cars’ kinematics in the immediate future, which are sourced from the relevant literature.We report several findings of note. First, under a set of assumed ‘central’ (i.e. most plausible) parameter values, the time requirement to process a standing queue of ten vehicles is decreased by 25% relative to human driven vehicles. Second, it was found that the standard queue discharge model for human–driven cars does not directly transfer to queue discharge of automated vehicles. Third, a wet roadway surface may result in an increase in capacity at signalized intersections. Fourth, a specific form of vehicle-to-vehicle (V2V) communications that allows all automated vehicles in the stationary queue to begin moving simultaneously at the beginning of a signal phase provides relatively minor increases in capacity in this analysis. Fifth, in recognition of uncertainty regarding the value of each operational parameter, we identify (via scenario analysis, calculation of arc elasticities, and Monte-Carlo methods) the relative sensitivity of overall traffic flow efficiency to the value of each operational parameter.This study comprises an incremental step towards the broader objective of adapting standard techniques for analyzing traffic operations to account for the capabilities of automated vehicles.