《MARPOL73/78》附则VI与柴油机NO_x排放控制技术

着重介绍《MARPOL 73/78》附则VI的起源和发达国家船舶柴油机氮氧化物(NOx)的排放控制技术发展状况,随着《MARPOL 73/78》附则VI的正式实施和今后国际海事组织(IMO)对《MARPOL 73/78》附则VI的进一步修订,船舶柴油机NOx的排放控制及其相关技术会受到包括轮机管理在内的相关人员越来越多的关注。     

柴油机排烟呈白色故障分析

文章以红岩6-250ZCD柴油机排烟呈白色为例子,介绍了故障现象及查找原因的过程,并对故障成因进行了剖析,有利于今后此类故障的快速确诊。     

地铁地下车站公共区防排烟设计相关探讨

通过对广州、深圳等城市已通车地铁地下车站工程的分析,从设计本身以及最新规范的相关防排烟条文出发,论述地铁地下车站公共区的防排烟模式和排烟风机的选择,提出防排烟设计在防排烟模式、防烟分区划分以及排烟风机选择方面应注意的事项,并给出相应的建议.     

进气预混甲醇降低柴油机碳烟与NOx排放的影响参数研究

在485QDI自然吸气直喷式柴油机上研究了不同喷嘴、不同供油定时、不同喷醇的起点对进气预混甲醇发动机的碳烟、NOx排放和经济性的影响。研究结果表明，为了降低碳烟和NOx排放以及提高燃油经济性，与燃用纯柴油的发动机相比，进气预混甲醇发动机的柴油喷射定时可以保持不变或稍小，但燃油喷嘴的孔径应适当减小，预混甲醇的发动机负荷起点应适中。     

发动机排气有源消声技术研究进展及发展趋势

简要介绍了发动机排气噪声的特点及其有源消声治理方法;就发动机排气有源消声技术的关键环节及其最新研究情况作了详尽的归纳和总结。评述了目前研究中尚存的问题与不足,并预测了其研究发展趋势。     

GZ机油添加剂对发动机环保性能影响的试验研究

通过对各种汽油机、柴油机进行的有无GZ添加剂时的对比试验,证明了GZ机油添加剂能降低发动机的机械噪声,减少柴油机排气烟度和汽油机的怠速有害排放,改善发动机的环保性能。     

Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

国产摩托车排放现状及控制进程分析

本文根据百余种国产摩托车排气污染物底盘测功机工况法测试结果，建立了相应的数据库，本文综述了国产摩托车排气污染物排放现状，在对欧洲和台洲摩托车排放控制进行考察和分析的基础上，结合我国情况，提出了摩托车排放控制进程建议。     

Greenhouse gas emissions from ships in ports – Case studies in four continents

Emissions of GHG from the transport sector and how to reduce them are major challenges for policy makers. The purpose of this paper is to analyse the level of greenhouse gas (GHG) emissions from ships while in port based on annual data from Port of Gothenburg, Port of Long Beach, Port of Osaka and Sydney Ports. Port call statistics including IMO number, ship name, berth number and time spent at berth for each ship call, were provided by each participating port. The IMO numbers were used to match each port call to ship specifications from the IHS database Sea-web. All data were analysed with a model developed by the IVL Swedish Environmental Research Institute for the purpose of quantifying GHG emissions (as CO₂-equivalent) from ships in the port area. Emissions from five operational modes are summed in order to account for ship operations in the different traffic areas. The model estimates total GHG emissions of 150,000, 240,000, 97,000, and 95,000 tonnes CO₂ equivalents per year for Gothenburg, Long Beach, Osaka, and Sydney, respectively. Four important emission-reduction measures are discussed: reduced speed in fairway channels, on-shore power supply, reduced turnaround time at berth and alternative fuels. It is argued that the potential to reduce emissions in a port area depends on how often a ship revisits a port: there it in general is easier to implement measures for high-frequent liners. Ships that call 10 times or less contribute significantly to emissions in all ports.     

Experimental evaluation of Heavy Duty Vehicle speed patterns in urban and port areas and estimation of their fuel consumption and exhaust emissions

Exhaust emissions and fuel consumption of Heavy Duty Vehicles (HDVs) in urban and port areas were evaluated through a dedicated investigation. The HDV fleet composition and traffic driving from highways to the maritime port of Genoa and crossing the city were analysed. Typical urban trips linking highway exits to port gates and HDV mission profiles within the port area were defined. A validation was performed through on-board instrumentation to record HDV instantaneous speeds in urban and port zones. A statistical procedure enabled the building-up of representative speed patterns. High contrasts and specific driving conditions were observed in the port area. Representative speed profiles were then used to simulate fuel consumption and emissions for HDVs, using the Passenger car and Heavy duty Emission Model (PHEM). Complementary estimations were derived from Copert and HBEFA methodologies, allowing the comparison of different calculation approaches and scales. Finally, PHEM was implemented to assess the performances of EGR or SCR systems for NO_X reduction in urban driving and at very low speeds.The method and results of the investigation are presented. Fuel consumption and pollutant emission estimation through different methodologies are discussed, as well as the necessity of characterizing very local driving conditions for appropriate assessment.