编组站驼峰车辆溜放速度控制系统的研究

以计算机和红外线传感器为主，研制了编组站驼峰车组溜放速度控制系统，系统通过检测车辆溜放的速度，计算出所需制动力的大小，通过缓器对车辆溜放进行速度控制，并具有对解体车辆自动计数，各种故障报警等功能。     

基于海上舰艇编队的信息战效能评估方法研究

通过信息论的度量方法,结合海上舰艇编队的实际装备,建立了信息战效能评估的量化模型,分析了敌我双方信息对抗对信息战效能的影响.该模型可用于海军信息战仿真和评估.     

城轨首都国际机场线CBTC信号系统

结合工程项目实际，对首都国际机场线采用的CBTC（基于通信的列车控制）信号系统进行介绍。     

现代有轨电车调度指挥系统的研究

借鉴高速铁路及城市轨道交通调度系统建设的经验,对现代有轨电车的调度指挥系统运行模式及系统控制模式进行了深入研究,阐述了现代有轨电车的调度系统的功能定位,在此基础上,提出了构建现代有轨电车调度系统的方法及系统整体架构。     

国内外经验对北京新机场线规划的启示

在研究总结国内外机场线运营模式及机场航站楼轨道交通车站特点的情况下,结合北京市新机场的选址和规模,提出北京市新机场线的运营模式和车站布置。在总结国际先进机场系统车站分布特征的基础上,阐述对北京新机场线的车站分布要求,最后提出结论和建议。     

轨道交通在机场地面集疏运体系中的应用

阐述和比较民航机场地面集疏运体系中轨道交通方式的分类和优势,介绍轨道交通在国外机场地面集疏运体系中的应用情况,分析民航机场地面集疏运体系的发展趋势,以及对我国大型枢纽机场集疏运体系发展的启示。     

R/S分析法在盾构下穿机场过程中的地表变形规律研究

为保证机场的正常运营,在盾构下穿机场的施工过程中,对地表沉降变形控制的要求较高,因此对穿越过程中的施工控制和变形规律研究具有重要意义。首先,基于盾构下穿机场的工程条件,分析盾构下穿过程中的风险,并提出相应的控制措施;同时,根据现场监测数据,分析盾构下穿机场过程中的地表沉降变形规律,并利用R/S分析法对地表沉降的发展趋势进行研究。结果表明:盾构施工引起的机场地表变形均在控制值范围以内,且各监测点在不同序列条件下的Hurst指数均大于0.5,具有沉降持续减弱的趋势,验证下穿过程中风险控制措施的有效性,为类似下穿机场的盾构施工提供一定的实践经验,也为盾构施工引起的地表沉降变形规律研究提供参考。     

Studies on emergency evacuation management for maritime transportation

Marine transportation is a vital component of the world’s economy and transportation network. The number of people using passenger ships around the globe is increasing worldwide. Similar to other transportation systems, passenger safety is critical in maritime shipment. As emergency evacuation processes for ships are highly different from and more complicated than those for buildings and other vehicles, many researchers have published a vast range of documents related to this peculiar research area. However, there is a tangible lack of sufficient literature review studies that investigate marine emergency evacuation (MEE). That being the case, the potential of marine transportation and the effect of emergency evacuation operation on life safety have inspired the proposal of this study. This paper offers a review of the available literature on MEE modelling, analysis and planning during the period from 1973 to 2017 using a systematic approach. After reviewing relevant academic journals, peer-reviewed conference papers, and technical reports of agencies, relevant literature is analysed. In addition, the literature review is extended by means of proposing a framework methodology which considers different possible conditions and situations during MEE. Finally, insights for ship managers and policymakers are discussed and potential future research directions are identified.     

Extreme hawser tension assessment for FPSO vessel during offloading operation in Bohai bay

The Floating Production Storage and Offloading Unit (FPSO) is an offshore vessel that produces and stores crude oil prior to tanker transport.Robust prediction of extreme hawser tensions during Floating Production Storage and Offloading (FPSO) operation is an important safety concern. Excessive hawser tension may occur during offloading operations, posing an operational risk. In this paper, AQWA has been used to analyze vessel response due to hydrodynamic wave loads, acting on a specific FPSO vessel under actual sea conditions. Experimental validation of numerical results has been discussed as well.This paper advocates methodology for estimating extreme response statistics, based on simulations (or measurements). The modified ACER (averaged conditional exceedance rate) method is presented in brief detail. Proposed methodology provides an accurate extreme value prediction, utilizing all available data efficiently. In this study the estimated return level values, obtained by ACER method, are compared to the corresponding return level values obtained by Gumbel method. Based on the overall performance of the proposed method, it is concluded that the improved ACER method can provide more robust and accurate prediction of the extreme hawser tension.Data declustering issue has been addressed. Paper highlights ability of ACER method to account for a set of varying sea state probabilities, as required in engineering long term statistical analysis.Described approach may be well used at the vessel design stage, while defining optimal vessel parameters that would minimize potential FPSO hawser tension.     

Improving train service reliability by applying an effective timetable robustness strategy

ABSTRACT

To avoid propagation of delays in dense railway timetables, it is important to ensure robustness. One strategy to improve robustness is to provide adequate amount of buffer times between trains. This study concerns how “scheduled minimum headways” should be determined in order to improve robustness in timetables. Scheduled minimum headways include technical minimum headway plus some buffer time. We propose a strategy to be implemented in timetables at the final stages of planning and prior to the operations. The main contributions of this study are 1) to propose a strategy where the size of the scheduled minimum headways is dependent on trains' travel times instead of a fixed-sized time slot and it is called “travel time dependent scheduled minimum headways” or TTDSMH, 2) to evaluate the effects of the new strategy on heterogeneity, speed, and the number of trains in timetables, 3) to show that a simple strategy can improve robustness without imposing major changes in timetables. The strategy is implemented in an Mixed Integer Linear Programming framework for timetabling and tested for some problem instances from Sweden. Results show that TTDSMH can improve robustness. The proposed strategy can be applied in intelligent transportation tools for railway timetabling.