典型航线船舶排放清单及排放特征研究

文章分析了我国典型航线典型船舶排放特征,以船舶自动识别系统数据为基础,收集整理所选研究船舶排放参数,结合船舶实际航行资料,采用动力法估算了秦皇岛港—广州港航线某散货船一个航行周期的排放清单,并分析了靠港、停泊、港内机动、巡航4个船舶状态下的排放特征,绘制了2 km×2 km分辨率的空间排放特征图。结果表明,该典型航线上典型散货船舶一个航行周期排放的SOx、NOx、PM10、PM2.5总量分别为18.88吨、30.87吨、1.85吨和1.69吨。排放源分析表明从在船舶的主机、辅机和锅炉3种排放源中,主机是主要排放源。航行状态上巡航工况排放量最大;船舶排放污染物的空间分析表明,船舶在进出港口区域是污染物排放最密集的区域。     

An operational activity-based method to estimate CO2 emissions from container shipping considering empty container repositioning

This paper develops an operational activity-based method to estimate CO₂ emissions from container shipping in contrasts to the traditional aggregated activity-based method. Two case studies investigate the impacts of empty container repositioning policies and port handling capacity on CO₂ emission index. The results show that the aggregated method could well overestimate CO₂ emissions and the operational activity-based method is more appropriate. The paper also demonstrates that high port-handling capacity and efficient empty container repositioning could reduce CO₂ emissions in seaborne container transportation.     

Effects of the ‘Belt and Road’ initiative on the wine import logistics of China

China’s Belt and Road (BR) initiative is expected to facilitate international trade between the countries involved. In this study, we review the special requirements of wine logistics and the market growth potential of wine consumption in China. A model minimizing generalized logistical costs is developed and applied to wine imports in China, so that the best candidate cities in which to locate transport gateways and distribution centers can be identified. Our analysis suggests that the most preferred gateways are Shanghai, Tianjin, Guangzhou, and Hong Kong, which all have similar delivery costs. In comparison, Beijing and Chongqing have much higher delivery costs, mainly because they do not have good access to marine transport and/or efficient domestic distribution networks. For long-distance intercontinental transport of large volumes of wine, marine shipping remains the only viable delivery mode. However, wine distribution within China extensively uses air, road, and water transport. Therefore, cities with excellent multi-modal transport services are better positioned to become wine logistics gateways. Our study also highlights the importance of value-added services and good government support, which are important factors that influence distribution costs and quality.     

Planning and Evaluation of Passenger Ferry Service in Hong Kong

A predominant observation in Hong Kong is the continuous loss in ferry patronage. There are two main reasons for this: poor level-of-service and better competitors. New roads, bridges, and tunnels are serving the buses, and to some extent the railways; whereas the investment in ferry terminals is relatively at a lower level. On the one hand, there is no need to promote the ferries in a free market environment; but on the other hand, the ferries have the best safety record, can only relieve some traffic congestion and need water access that is one of the characteristics of Hong Kong. The goal of this paper is to design a planning approach combined with an evaluation procedure on how to make the best use of the existing water and pier resources in Hong Kong through the provision of commercially viable ferry services. The approach used covers the impact of future developments planning up to 2006 comprising all public transport modes in Hong Kong (heavy rail, metro, bus, and ferry). The planning tool is based on a newly developed multi-objective evaluation method in order to assess the ferry routes with scientific, practical, and simplified analyses for future use. This assessment is applied to the existing ferry routes and candidate routes and can also be carried out on an individual route basis or on a given set of routes. The objective functions set forth analytically in the evaluation method take into account the interests of the three participants: the passengers, the operators and the government. The proposed ferry network design formulation and the suggested new ferry routes will have a positive impact on changing the ferry system’s image in Hong Kong.     

紧急疏散情况下地铁车站动态瓶颈识别

随着城市轨道交通系统逐渐成网,地铁车站日渐拥挤,为了制定科学有效的紧急疏散方案,有必要预先找到车站瓶颈点。基于时间可靠度函数模拟乘客在紧急情况下路径选择行为,在此基础上引入M//G/C/C排队模型对车站排队系统各个服务台进行排队性能指标计算,找出潜在瓶颈点。以广州地铁3号线岗顶站为例,结合车站硬件设施尺寸数量,模拟计算最恶劣情况下乘客疏散过程,找到3处潜在瓶颈点,测算结果与实际观测情况相符合,验证了该方法的有效性。     

城市公路客运站选址与班线分配方法研究

以旅客出行的时间消耗降最低为目标,兼顾客运站的建设成本和经营效益,建立公路客运站的选址与班线分配模型。通过遗传算法求解,并请专家对最好的几组计算结果予以评估和修正,得到客运站的最优选址和班线分配方案。     

试论旅游线路设计的原则

旅游线路的设计不仅要考虑旅游需求的满足,同时也要考虑旅游供给的可持续发展。本文主要从以上两方面论述了旅游线路设计必须遵循的六大原则。     

���ǽ�����źŵ�Ӱ�����ɢ·���о�

交叉口是城市交通路网中的基本单元,在考虑应急疏散路线中的延误问题时,交叉口的信号灯造成的延误是不可忽略的因素. 由于信号控制交叉口包含具有指定持续时间的一系列时间窗,导致不同的疏散开始时刻对应着不同的交叉口延误,从而有不同的疏散优化路线. 考虑交叉口信号灯延误和通行能力,通过寻找网络的最小费用流来优化事故地点至目的地的最佳疏散路线及相应的疏散流量,设计了一种复合标号算法求解网络的最小费用流. 最后以数值算例说明了算法的有效性,并对不同疏散开始时刻得出的疏散路线进行了对比. 结果表明该方法能很好地兼顾疏散时刻和疏散路线优化的要求.     

深圳地铁2号线行车交路设计探析

以深圳市2号线交路设计为实例,从客流需求角度出发对城市轨道干线的交路设计进行分析,提出合理的交路运行方案,并对方案进行检验和总结,为2号线后期工程设计提供合理的设计依据。