| 摩托车前大灯线夹断裂工艺分析 |
| |
| 引用本文： | 王峥琎.摩托车前大灯线夹断裂工艺分析[J].摩托车技术,2006(4):26-28. |
| |
| 作者姓名： | 王峥琎 |
| |
| 作者单位： | 江苏省盐城市圣茂机械厂 |
| |
| 摘 要： | 线夹凹凸面折弯处圆角过小引起应力集中,是造成前大灯线央断裂的主要原因。加上电镀后未采取去氢脆处理、热处理温度不稳定超过上限值等原因,致使前大灯线夹在安装和维修保养时从3．5 mm开口处张开造成断裂。
|
| 关 键 词： | 弹性薄壁 前大灯线夹 工艺分析 |
| 收稿时间： | 2006-03-07 |
| 修稿时间： | 2006年3月7日 |
An Analysis of Manufacturability of Thin-walled Parts |
| |
| Wang Zhengjin.An Analysis of Manufacturability of Thin-walled Parts[J].Motorcycle Technology,2006(4):26-28. |
| |
| Authors: | Wang Zhengjin |
| |
| Institution: | Jiangsu Yancheng Shengmao Machinery Factory |
| |
| Abstract: | The stress concentration caused by the too-small fillet at the area where the male-and-female face of the terminal holder bends is the main reason breaking the headlamp terminal holder. What' s more, the following factors, such as, no hydrogen brittleness treating after painted, the unstable temperature for heat treatment which surpasses the upper limit, etc. worsen the case. |
| |
| Keywords: | Elastic thin-wall Headlamp terminal holder Technological analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
