| STM理论中拉压杆间夹角取值范围的研究 |
| |
| 引用本文： | 谢志明,陈晓飞. STM理论中拉压杆间夹角取值范围的研究[J]. 交通标准化, 2008, 0(8): 130-132. DOI: 10.3869/j.issn.1002-4786.2008.08.038 |
| |
| 作者姓名： | 谢志明 陈晓飞 |
| |
| 作者单位： | 广东省高速公路有限公司,广东,广州,510100;新疆交通建设管理局北方机械化筑路工程处,新疆,乌鲁木齐,830016 |
| |
| 摘 要： | 现有规范中没有明确地将拉压杆间夹角与腹板的配筋率、腹板钢筋的屈服强度和混凝土的极限抗压强度等因素联系起来。通过推导拉压杆夹角的取值范围和分析拉压杆夹角范围与腹板配筋率、腹板钢筋屈服强度和混凝土极限抗压强度等因素之间的关系，可为相关研究提供参考。
|
| 关 键 词： | 干扰区 拉压杆模型 拉压杆夹角 |
Research on the Span of Strut-and-Tie Angle Based on STM Theory |
| |
| XIE Zhi-ming,CHEN Xiao-fei. Research on the Span of Strut-and-Tie Angle Based on STM Theory[J]. Communications Standardization, 2008, 0(8): 130-132. DOI: 10.3869/j.issn.1002-4786.2008.08.038 |
| |
| Authors: | XIE Zhi-ming CHEN Xiao-fei |
| |
| Affiliation: | XIE Zhi-ming, CHEN Xiao-fei (1.Guangdong Provincial Freeway Co., Ltd., Guangzhou 510100, China; 2.North Mechanization Road Construction Engineering Department, Traffic Construction Administrotan Bureau of Xinjiang Uygur Autanomcus Region, Urumqi 830016, China) |
| |
| Abstract: | Existing criterions did not contact the strut-and-tie angle with the ratio of reinforcement of web plate, yield strength of reinforcing steel bar in web plate, compressive ultimate strength of concrete and other factors expressly. Deducing the span of strut-and-tie angle and analyzing the relationship during span of strut-and-tie angle, the ratio of reinforcement of web plate, yield strength of reinforcing steel bar in web plate, compressive ultimate strength of concrete and other factors can provide references for correlative research. |
| |
| Keywords: | interference region strut-and-tie model strut-and-tie angle |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
