| 焊后处理工艺对Q345E低合金钢焊接接头疲劳性能的影响 |
| |
| 引用本文： | 陈大庆,陈增有,马清波,许鸿吉.焊后处理工艺对Q345E低合金钢焊接接头疲劳性能的影响[J].大连交通大学学报,2012,33(2):73-76. |
| |
| 作者姓名： | 陈大庆 陈增有 马清波 许鸿吉 |
| |
| 作者单位： | 1. 齐齐哈尔轨道交通装备有限责任公司,黑龙江齐齐哈尔,161002
2. 大连交通大学材料科学与工程学院,辽宁大连,116028 |
| |
| 摘 要： | 通过对K型坡口Q345E低合金钢T型角接接头三点弯曲疲劳试验,研究了焊趾不处理、焊趾打磨、焊趾喷丸、焊趾打磨+喷丸处理对焊接接头疲劳性能的影响.结果表明,焊接接头焊后细节处理工艺对接头疲劳性能的影响十分显著,焊趾打磨和焊趾喷丸均是提高焊接接头疲劳性能的重要手段,而焊趾打磨+喷丸处理综合处理时效果最佳.
|
| 关 键 词： | Q345E 焊后处理 焊接接头 疲劳性能 |
Influence of Post-Treatment Process on Fatigue Properties of Q345 E Welds |
| |
| CHEN Da-qing
,
CHEN Zeng-you
,
MA Qing-bo
,
XU Hong-ji.Influence of Post-Treatment Process on Fatigue Properties of Q345 E Welds[J].Journal of Dalian Jiaotong University,2012,33(2):73-76. |
| |
| Authors: | CHEN Da-qing CHEN Zeng-you MA Qing-bo XU Hong-ji |
| |
| Institution: | 1.Qiqihar Rail Equipment Co.,Ltd,Qiqihar 161002,China;2.School of Materids Science and Engineering,Dalian Jiaotong University,Dalian 116028,China) |
| |
| Abstract: | Three-point bend fatigue test of K type groove Q345E angle weld is conducted to determine the effects of weld toe not processing,weld toe grinding,weld toe shot peening,weld toe grinding and shot peening treatment of the welds on their fatigue performance.The results show that,the influence of different processing technology on the weld fatigue performance is singnificant,the weld toe grinding and weld toe shot peening are the important means to improve the weld fatigue performance,while by means of weld toe grinding and shot peening treatment,the weld fatigue performance is the best. |
| |
| Keywords: | Q345E post-treatment process welded joint fatigue performance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
