磁浮列车非接触式供电技术

针对高速磁浮列车在狭窄空间内高经济性、高可靠性车载供电需求，在耦合磁路、电气性能仿真、设计优化基础上，提出一种发射端多匝线圈且无磁芯、拾取端类似双U型耦合磁路结构的非接触供电系统（inductive power supply，IPS），该系统采用了理论设计、仿真分析以及试验验证相结合的研究方法. 首先，根据高速磁浮列车供电需求，通过理论计算确定各设备主要参数，完成IPS系统设计方案；然后，进行耦合磁路设计及仿真分析:利用Maxwell软件对多种耦合磁路进行3D仿真分析，确定耦合磁路最优设计方案，开展三维电磁仿真得到拾取装置与地面发射线圈间互感；紧接着，进行电气性能仿真分析:利用Matlab软件建立IPS系统电气仿真模型，仿真IPS系统传输功率及效率，根据供电需求确定补偿装置、地面逆变电源及DC/DC参数；最后，研制完成供电功率150 kW磁场耦合非接触供电系统，并部署于磁浮样车试验线，完成了现场EMC （electromagnetic magnetic compatibility）性能、电气性能测试验证. 验证结果表明:传输功率超过150 kW，效率92%，达到项目预期目标. 

Contactless Power Supply Technology for Maglev Trains

Aiming at the on-board power supply requirements of high-speed maglev trains in economy and reliability in narrow spaces, utilizing the coupling magnetic circuit, electrical performance simulation, and design optimization, a new type of transmitter, a non-contact power supply system (inductive power supply, IPS), is proposed, which features a multi-turn coil at the transmitting end, no magnetic core, and pickup ends similar to a double U-shaped coupled magnetic. First, according to the power supply requirements of high-speed maglev trains, the main parameters of each device are determined through theoretical calculations, and the IPS system design plan is completed. Then design and simulation analysis of the coupling magnetic circuit is conducted, including the use of Maxwell software to perform 3D simulation analysis on various coupling magnetic circuits, determining the optimal design scheme of the coupling magnetic circuit, and three-dimensional electromagnetic simulation to obtain the mutual inductance between the pickup device and the ground transmitting coil. Next, electrical performance simulation analysis is conducted with the use of Matlab software to establish an electrical simulation model of the IPS system, simulate the transmission power and efficiency of the IPS system, and determine the compensation device, ground inverter power supply and DC/DC parameters according to the power supply requirements. Finally, the 150 kW magnetic-field coupling contactless power supply system was developed and deployed on the maglev prototype test line. The on-site EMC (electromagnetic magnetic compatibility) performance and electrical performance test verification was completed. The transmission power exceeds 150 kW and the efficiency is 92%, achieving the expected objectives of the project