首页 | 本学科首页   官方微博 | 高级检索  
     检索      

涡轮特性曲线优化与缸内直喷汽油机排气歧管匹配研究
引用本文:韩文艳,许思传,邓潇,周岳康,张弘.涡轮特性曲线优化与缸内直喷汽油机排气歧管匹配研究[J].汽车技术,2012(2):19-23.
作者姓名:韩文艳  许思传  邓潇  周岳康  张弘
作者单位:1. 同济大学;中北大学
2. 同济大学
3. 上海汽车集团股份有限公司技术中心
摘    要:分别采用4种方法优化了某涡轮增压器特性曲线,并将计算结果与输入的测量点数据进行了对比,确定了适合优化所用涡轮流量-压比曲线的最佳方法。利用AMESim软件建立了某汽油机整机热力学仿真模型,并对该发动机全负荷工况的主要参数进行了标定。将所得涡轮特性曲线用于该涡轮增压汽油机的排气歧管优化匹配研究中。结果表明,合理匹配排气歧管可以使该机中低速扭矩和燃油消耗率分别实现5.2%和5%的改善。

关 键 词:缸内直喷汽油机  涡轮特性曲线  排气歧管  优化

Optimization of Turbine MAP and Study on the Matching for a GDI Engine's Exhaust manifold
Han Wenyan , Xu Sichuan , Deng Xiao , Zhou Yuekang , Zhang Hong.Optimization of Turbine MAP and Study on the Matching for a GDI Engine's Exhaust manifold[J].Automobile Technology,2012(2):19-23.
Authors:Han Wenyan  Xu Sichuan  Deng Xiao  Zhou Yuekang  Zhang Hong
Institution:1.Tongji University;2.North University of China;3.Shanghai Motor Technical Center)
Abstract:In this paper,four methods are applied separately to optimize characteristic MAP of a turbocharger,and the calculated results are compared with the measured data input,thus the optimal method of turbine flow-pressure rate curve for optimized is defined.With the application of software AMESim,a gasoline engine’s thermodynamics simulation model is built,and main engine parameters under full load conditions are calibrated.The optimized turbine MAP is used to investigate the matching for a turbocharged gasoline engine’s exhaust manifold.The results show that the maximum improvement about 5.2% and 5% at low and middle speed can be achieved respectively when the exhaust manifold is matched reasonably.
Keywords:Gasoline direct injection(GDI) engine  Turbine MAP  Exhaust manifold  Optimization
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号