| 某自卸车转向与悬架干涉的ADAMS校核和优化设计 |
| |
| 引用本文： | 李志魁,王建宇,温圣灼. 某自卸车转向与悬架干涉的ADAMS校核和优化设计[J]. 汽车技术, 2012, 0(2): 30-34 |
| |
| 作者姓名： | 李志魁 王建宇 温圣灼 |
| |
| 作者单位： | 中国第一汽车股份有限公司技术中心 |
| |
| 摘 要： | 汽车设计中通常采用平面作图法校核转向与悬架干涉量,但该方法有一定缺点。本文结合某自卸车的方案布置,探索运用ADAMS/View软件对转向与悬架干涉量进行校核和优化设计的方法。以车轮跳动引起的转向与悬架干涉量最小为优化目标,对转向垂臂的布置位置进行了优化,并对制动引起的转向与悬架干涉量进行了校核。按照优化结果进行布置,可得到理想的转向、悬架协调运动关系。
|
| 关 键 词： | 转向系统 悬架 干涉 ADAMS 优化设计 |
Using ADAMS to Check and Optimize the Interference Quantity between Steering and Suspension System of a Dump Truck |
| |
| Li Zhikui , Wang Jianyu , Wen Shengzhuo. Using ADAMS to Check and Optimize the Interference Quantity between Steering and Suspension System of a Dump Truck[J]. Automobile Technology, 2012, 0(2): 30-34 |
| |
| Authors: | Li Zhikui Wang Jianyu Wen Shengzhuo |
| |
| Affiliation: | (China FAW Limited Company R&D Center) |
| |
| Abstract: | Engineers usually use the planar drawing method to check the interference quantity between the steering and suspension system,but this method isn’t accurate.Based on the dump truck packaging,this paper presents a new method to check and optimize the interference quantity between steering and suspension system.We optimize the location of the pitman arm in order to minimize the interference quantity caused by the bump and rebound travel of the front wheels and also check the interference quantity caused by brake.Ideal coordination could be achieved between steering and suspension if the dump truck is packaged based on the optimization. |
| |
| Keywords: | Steering System Suspension Interference ADAMS Optimized design |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
