| DQ45型钳夹车钳形梁试验耳孔应力分布不均的有限元研究 |
| |
| 引用本文： | 关晓丽. DQ45型钳夹车钳形梁试验耳孔应力分布不均的有限元研究[J]. 铁道车辆, 2011, 49(6): 7-10,47 |
| |
| 作者姓名： | 关晓丽 |
| |
| 作者单位： | 齐齐哈尔轨道交通装备有限责任公司技术中心,黑龙江齐齐哈尔,161002 |
| |
| 摘 要： | 叙述了DQ45型钳夹车静强度试验时其钳形梁同一车耳孔处应力内外偏差较大、分布不均的现象。应用有限元分析技术,通过倾斜连接销的角度模拟试验承载装置上的车耳孔同轴度偏差,从理论上验证了试验承载装置上的车耳孔同轴度发生偏差是引起耳孔处应力内外偏差较大、分布不均的主要原因。
|
| 关 键 词： | DQ45型钳夹车 钳形梁 耳孔 应力分布 有限元 |
The Finite Element Research on Uneven Distribution of Stresses on Ear Hole in the Test for the Schnabel of the DQ45 Schnabel Car |
| |
| GUAN Xiao-li. The Finite Element Research on Uneven Distribution of Stresses on Ear Hole in the Test for the Schnabel of the DQ45 Schnabel Car[J]. Rolling Stock, 2011, 49(6): 7-10,47 |
| |
| Authors: | GUAN Xiao-li |
| |
| Affiliation: | GUAN Xiao-li (female,born in 1973,senior engineer,Technical Center of Qiqihar Rail Traffic Equipment Co.,Ltd.,Qiqihar 161002,China) |
| |
| Abstract: | The phenomina of big difference between inside and outside stresses,and the uneven distribution of stresses at the same ear hole of the schnabel during the static strength test for the DQ45 schnabel car are described.With the finite element analysis technology,by tilting of the angle of the joint bolt to simulate the axial deviation of ear hole on the load carrying device in test,it is proved theoretically that the axial deviation of ear hole on the load carrying device in test is the main cause to the big ... |
| |
| Keywords: | DQ45 schnabel car schnable ear hole distribution of stresses finite element |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
