Practically applicable devices for blocking the gap flow of a horn rudder to reduce rudder cavitation and their verification through numerical simulations

Rudder cavitation causes serious damage to the rudder and affects the safety and cost-effectiveness of a ship. In recent applications, a semicircular prismatic bar protruding beyond the concave surface of the horn facing the gap, located along the center-plane of the rudder, has been used to lessen the gap flow between the horn and the movable portion of the rudder system. Previous numerical studies with this single bar indicate that it can noticeably reduce rudder cavitation. In the present study, a pair of bars for blocking the vertical gaps, which are attached symmetrically to the center-plane on opposite convex surfaces of the movable portion, is suggested for circumventing the difficulties that arise in the practical application of single centre bars. Placed near the outer edges of the gap, the bars are are easily accessible at the maximum rudder angle to allow simple installation during routine ship maintenance. An additional blocking disk is inserted on top of the pintle block, blocking the horizontal gaps. Three-dimensional computations are conducted with these combined devices and the results show that the devices are remarkably efficacious in reducing rudder gap cavitation.