| 基于AIBA引发体系的聚丙烯酰胺合成与性能研究 |
| |
| 引用本文： | 刘建平,王雪芳,杨小敏,徐培飞.基于AIBA引发体系的聚丙烯酰胺合成与性能研究[J].华东交通大学学报,2010,27(5):43-47. |
| |
| 作者姓名： | 刘建平 王雪芳 杨小敏 徐培飞 |
| |
| 作者单位： | 华东交通大学基础科学学院,江西南昌330013 |
| |
| 摘 要： | 以偶氮二异丁脒盐酸盐(AIBA)与过硫酸铵(APS)组成复合引发体系,采用分段引发法,在水溶液中聚合出了聚丙烯酰胺。以单体浓度、引发剂配比、初引发温度和尿素用量为实验因素,以分子量为考察指标,通过正交试验法得到最佳工艺条件为单体浓度40%,APS∶AIBA为1∶2,初引发时间为1 h,尿素占单体为0.05,合成出的PAM分子量达到550.6万。絮凝性实验表明分子量越高絮凝效果越好,溶解性实验说明合成时加入尿素会有效缩短溶解时间。
|
| 关 键 词： | 偶氮二异丁脒盐酸盐 聚丙烯酰胺 分段引发 |
A Study on Synthesis and Properties of Polyacrylamide Based on AIBA Initiating System |
| |
| Liu Jianping,Wang Xuefang,Yang Xiaomin,Xu Peifei.A Study on Synthesis and Properties of Polyacrylamide Based on AIBA Initiating System[J].Journal of East China Jiaotong University,2010,27(5):43-47. |
| |
| Authors: | Liu Jianping Wang Xuefang Yang Xiaomin Xu Peifei |
| |
| Institution: | (School of Basic Sciences,East China Jiaotong University,Nanchang 330013,China) |
| |
| Abstract: | Polyacrylamide is synthesized in water solution,by using a complex initiating system composed of Azobisisobutryamide（AIBA）and Ammonium persulfate（APS）,with segmental initiating mode.The experimental factors of monomer concentration,the mass ratio of AIBA to APS,the initial reacting time and the dosage of carbamide（to monomer）on the molecular weight of product are studied.By orthogonal experimental test,the optimal synthesis conditions are：monomer concentration 40%,the mass ratio of AIBA to APS 1∶2,the imitation reaction time 1 hour,the dosage of carbamide 0.05,the molecular weight of polyacrylamide is greater than 550.6×104.The relationship between molecular weight and flocculability,solubility are also examined,the result shows that product with higher molecular weight always has a better flocculent efficiency,while its dissolution rate is slower. |
| |
| Keywords: | Azobisisobutryamide Polyacrylamide Segmental initiating mode |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《华东交通大学学报》浏览原始摘要信息 |
| 点击此处可从《华东交通大学学报》下载免费的PDF全文 |
|
