首页 | 本学科首页   官方微博 | 高级检索  
     检索      

钽薄壁管焊接成形前期开口间隙场计算的有限元模型
引用本文:张景,周方明,谭一炯,钱乙余.钽薄壁管焊接成形前期开口间隙场计算的有限元模型[J].华东船舶工业学院学报,2005,19(4):82-85.
作者姓名:张景  周方明  谭一炯  钱乙余
作者单位:[1]江苏科技大学材料科学与工程学院,江苏镇江212003 [2]哈尔滨工业大学现代焊接生产技术国家重点实验室,黑龙江哈尔滨150001
摘    要:为了控制钽薄壁管焊接成形的质量,进行钽薄壁管开口间隙场计算模型的研究。借助有限元方法、薄壳理论以及平板弯曲理沦,得到整体单元的刚度矩阵,建立了钽薄壁管开口间隙场计算的有限元模型。该模型精确描述了钽薄壁管焊前成形开口间隙的形状.利用该模型可以系统地研究钽薄壁管焊前成形的过程,为正确地选择成形工艺参数提供了理论依据。试验表明,理论计算与实测结果吻合得较好。

关 键 词:开口间隙  有限元  焊接  钽薄壁管
文章编号:1006-1088(2005)04-0082-04
收稿时间:2004-11-19

Finite Element Model of Opening Gap of Thin-walled Tantalum Tube in Prophase of Welding
Zhang Jing;Zhou FangMing;Tan YiJiong;Qian YiYu.Finite Element Model of Opening Gap of Thin-walled Tantalum Tube in Prophase of Welding[J].Journal of East China Shipbuilding Institute(Natural Science Edition),2005,19(4):82-85.
Authors:Zhang Jing;Zhou FangMing;Tan YiJiong;Qian YiYu
Abstract:In order to control the welding quality of the thin-walled tantalum tube, the calculating model of the opening gap is studied. By means of finite element method, the thin shell theory and the plate flexure theory, the stiffness matrix of globe unit is obtained. The finite element model of opening gap tantalum thin-walled tube is setup. This model can be used to describe the opening gap exactly and the status of the thin-walled tantalum tube in the welding prophase. It can also provide the theoretical basis for choosing the right parameter in the process of shaping. Experiments show that the similar results are matched between theoretical calculation and the experiments.
Keywords:opening gap  finite element  welding  tantalum thin-walled tube
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号