| 基于PSPC的涂装工艺优化方案的研究 |
| |
| 引用本文： | 严勇,徐荣远,赵丽. 基于PSPC的涂装工艺优化方案的研究[J]. 江苏船舶, 2011, 0(3): 9-11,30 |
| |
| 作者姓名： | 严勇 徐荣远 赵丽 |
| |
| 作者单位： | 南通明德重工有限公司; |
| |
| 摘 要： | 主要研究分析在PSPC规范下通过不同的涂装方案对膜厚及涂装施工成本消耗的影响规律，以此建立最佳的涂装工艺，通过试验确立最佳涂装方案。采用KETY LZ990磁性膜厚测量仪、表面缺陷观察、秒表和卷尺等方式分别研究了涂层厚度分布情况、表面宏观特征、施工效率和单位面积涂料用量。结果表明：采用最佳喷涂工艺，可使涂层均匀，施工时...
|
| 关 键 词： | 涂装工艺 PSPC规范 施工效率 |
Research on coating process optimization based on PSPC |
| |
| Yan Yong,Xu Rongyuan,Zhao Li. Research on coating process optimization based on PSPC[J]. Jiangsu Ship, 2011, 0(3): 9-11,30 |
| |
| Authors: | Yan Yong Xu Rongyuan Zhao Li |
| |
| Abstract: | The paper researches and analyzes the affection regulation by different coating scheme to thickness and coating construction cost consumption in PSPC rules,and sets up the optimal coating technique,establishes the optimal coating scheme by trial.It researches separately coating thickness distributing situation,surface macro-feature,construction efficiency and the amount of paint per unit area using KETT LZ990 magnetic film thickness measuring instrument,surface defect observation,stopwatch,tape line etc mod... |
| |
| Keywords: | |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
