首页 | 本学科首页   官方微博 | 高级检索  
     检索      

EEVC侧碰蜂窝铝CAE模型的开发与验证
引用本文:杨辉,余良富,李霖.EEVC侧碰蜂窝铝CAE模型的开发与验证[J].上海汽车,2011(8).
作者姓名:杨辉  余良富  李霖
作者单位:1. 上海机动车检测中心,上海,201805
2. 同济大学汽车学院汽车安全技术研究所,上海,201804
基金项目:国家质量监督检验检疫总局科技计划项目
摘    要:在实验数据的基础上,借鉴国外模型的优点,开发出实体单元侧碰MDB蜂窝铝CAE模型。该模型充分适应侧面碰撞的特点,解决侧碰蜂窝铝厚度渐变给建模带来的困难,在满足计算精度的前提下具有计算速度快、代价小的优点。通过大量的模型验证说明该模型不仅可以满足ECE法规的要求,还能满足EEVCWG13工作组推荐的几种额外动态测试要求,达到工程实用的要求。

关 键 词:侧面碰撞  汽车  CAE模型  

Development and Validation of CAE Model of EEVC Honeycomb for Side Impact Moving Deformable Barrier
Yang Hui Li Lin Yu Liangfu.Development and Validation of CAE Model of EEVC Honeycomb for Side Impact Moving Deformable Barrier[J].Shanghai Auto,2011(8).
Authors:Yang Hui Li Lin Yu Liangfu
Institution:Yang Hui Li Lin Yu Liangfu
Abstract:The EEVC honeycomb for automobile side impact MDB is modeled by solid elements based on the experimental data and other models' advantages.This model overcomes the difficulty of tapering thickness of the MDB honeycomb foil along the depth and has the advantage of low cost and high efficiency while assuring the accuracy.Many of validations show that this model can not only meet the requirement of ECE regulation but also have good consistence with tests for the extra dynamic procedures recommended by EEVC WG1...
Keywords:
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号