| 起重船波浪载荷直接计算与规范计算比较研究 |
| |
| 引用本文： | 张小雅,金允龙,姜河蓉,夏雪. 起重船波浪载荷直接计算与规范计算比较研究[J]. 中国航海, 2011, 34(4) |
| |
| 作者姓名： | 张小雅 金允龙 姜河蓉 夏雪 |
| |
| 作者单位： | 上海船舶运输科学研究所航运技术与安全国家重点实验室,上海,200135 |
| |
| 摘 要： | 采用基于三维频域线性水动力理论的波浪载荷计算软件Wave Loads Calculation System对1 600 t全回转浮吊船进行了波浪载荷计算(主要指垂向弯矩与剪力),得到不同工况下载荷分布的特点.并将计算结果与中国船级社《钢质海船入级规范》中的规范计算结果进行了比较.研究表明:起重船由于其船型、质量分布和载荷工况不同于运输船,规范计算公式无法对其波浪载荷做出合理评估,而采用直接计算方法,能够根据装载状态,较为准确和详细地预报船体波浪载荷及其分布.
|
| 关 键 词： | 船舶、船舶工程 起重船 总纵强度 直接计算 波浪载荷 垂向弯矩 剪力 |
Comparative Study of Wave Loads for Floating Crane Barges by Direct Calculation and Rules |
| |
| Zhang Xiaoya,Jin Yunlong,Jiang Herong,Xia Xue. Comparative Study of Wave Loads for Floating Crane Barges by Direct Calculation and Rules[J]. Navigation of China, 2011, 34(4) |
| |
| Authors: | Zhang Xiaoya Jin Yunlong Jiang Herong Xia Xue |
| |
| Affiliation: | Zhang Xiaoya,Jin Yunlong,Jiang Herong,Xia Xue(State Key Laboratory of Navigation and Safety Technology,Shanghai Ship and Shipping Research Institute,Shanghai 200135,China) |
| |
| Abstract: | The WALCS software based on three-dimensional linear potential flow theories is applied to carry out the calculation of wave loads for a 1600t floating crane barge and the characteristics of load distributions under different operating conditions are obtained.The calculated results are compared with the ones calculated by Rules.The study shows that due to the great difference of the mass distributions and loading conditions between floating crane and transport ships,the simplified formula of Rules can not a... |
| |
| Keywords: | ship naval engineering crane barge longitudinal strength direct calculation wave loads vertical wave bending moment shear force |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
