| 桥式起重机吊重二自由度摆角模型与仿真 |
| |
| 引用本文： | 张则强,程文明,钟斌,唐连生.桥式起重机吊重二自由度摆角模型与仿真[J].西南交通大学学报,2006,41(6):696-699. |
| |
| 作者姓名： | 张则强 程文明 钟斌 唐连生 |
| |
| 作者单位： | 西南交通大学机械工程研究所,四川,成都,610031 |
| |
| 基金项目： | 四川省应用基础研究项目（04JY029-058-1）;四川省科技攻关计划项目（2006Z08-037）本文的工作得到西南交通大学科技发展基金（2006A03）及西南交通大学博士生创新基金的资助. |
| |
| 摘 要： | 为了实现桥式起重机小车的准确定位和尽快消除吊重摇摆，研究吊重摇摆的规律和影响因素．根据小车吊重系统三维动力学方程建立了吊重二自由度摆角的数学模型．动态仿真结果表明：小车运行加（减）速度对摆角的影响比绳长显著，加（减）速度增大1倍时，摆角和摆速分别约增大0．12rad和0．164rad／s；绳长增加2m时，摆角和摆速无明显变化，吊重自由摆动周期约增加1．3s．
|
| 关 键 词： | 桥式起重机 小车吊重系统 摆角 动态仿真 |
| 文章编号： | 0258-2724（2006）06-0696-04 |
| 收稿时间： | 2005-11-16 |
| 修稿时间： | 2005-11-16 |
Model and Simulation of Angel of Two-Degree of Freedom for Overhead |
| |
| ZHANG Zeqiang,CHENG Wenming,ZHONG Bin,TANG Liansheng.Model and Simulation of Angel of Two-Degree of Freedom for Overhead[J].Journal of Southwest Jiaotong University,2006,41(6):696-699. |
| |
| Authors: | ZHANG Zeqiang CHENG Wenming ZHONG Bin TANG Liansheng |
| |
| Institution: | Research Institute of Mechanical Eng. , Southwest Jiaotong University, Chengdu 610031, China |
| |
| Abstract: | To precisely position the load and promptly stop load swing for overhead and gantry cranes, the swing of load and the influencing factors were investigated. A 2-degree of freedom model of load swing angel was derived based on 3-dimensional dynamic equations of the trolley-load system. Dynamic simulation results show that the trolley acceleration has greater effect on the swing angel of load than the rope length, with the swing angle and the angular velocity of swing increasing 0. 12 rad and 0. 164 rad/s, respectively, with an increase of 1 times in the acceleration of the trolley; and there is no obvious change in the swing angle and the angular velocity of swing, but the cycle of swing increases 1.3 s, with an increase of 2 m in the rope length. |
| |
| Keywords: | overhead crane trolley-load system swing angel dynamic simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
