| 沥青路面灌缝胶性能评价及技术要求 |
| |
| 引用本文： | 李峰,黄颂昌,徐剑,秦永春.沥青路面灌缝胶性能评价及技术要求[J].交通运输工程学报,2009,9(2). |
| |
| 作者姓名： | 李峰 黄颂昌 徐剑 秦永春 |
| |
| 作者单位： | 李峰,LI Feng(同济大学,道路与交通工程教育部重点实验室,上海,200092;交通部公路科学研究院,北京,100088);黄颂昌,徐剑,秦永春,HUANG Song-chang,XU Jian,QIN Yong-chun(交通部公路科学研究院,北京,100088)
|
| |
| 基金项目： | 交通部交通标准项目，国家西部交通建设科技项目 |
| |
| 摘 要： | 为了评价沥青路面裂缝和接缝加热型灌缝胶的性能,参考了ASTM D5329灌缝胶试验方法,根据中国灌缝胶产品质量现状和性能要求,通过室内试验确定了锥入度、软化点、流动、弹性和低温拉伸5个试验方法,收集国内常用的11种灌缝胶样品进行了试验,并提出了中国沥青路面灌缝胶锥入度、软化点、流动值、弹性恢复、低温拉伸5个性能评价指标及相应的技术要求.结果发现:10个样品的软化点超过了80℃,9个样品的流动值低于5 mm,3个样品通过了50%拉伸量3个循环的低温拉伸试验,这表明中国常用的灌缝胶高温性能比较理想,而低温性能普遍较差.
|
| 关 键 词： | 路面材料 灌缝胶 高温性能 低温性能 技术要求 |
Performance evaluation and technical requirement of sealant and filler in asphalt pavement |
| |
| LI Feng,HUANG Song-chang,XU Jian,QIN Yong-chun.Performance evaluation and technical requirement of sealant and filler in asphalt pavement[J].Journal of Traffic and Transportation Engineering,2009,9(2). |
| |
| Authors: | LI Feng HUANG Song-chang XU Jian QIN Yong-chun |
| |
| Institution: | 1.Key Laboratory of Road and Traffic Engineering of Ministry of Education;Tongji University;Shanghai 200092;China;2.Research Institute of Highway of Ministry of Communications;Beijing 100088;China |
| |
| Abstract: | In order to evaluate the performance of hot-applied type sealant and filler in asphalt pavement, Chinese sealant and filler conditions and performance requirements were analyzed, five test methods on cone penetration, softening point, flow, resilience and tension at low temperature were respectively determined by reference of ASTM D5329, eleven samples of sealant and filler were tested, and five performance evaluation indices and their technical requirements were defined. Test result shows that the softenin... |
| |
| Keywords: | pavement material sealant and filler high-temperature performance low-temperature performance technical requirement |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
