| 汽油机活塞组一气缸套整体耦合传热模型及应用 |
| |
| 引用本文： | 刘志恩,蒋炎坤,董哲林,叶晓明,陈国华,刘亚军.汽油机活塞组一气缸套整体耦合传热模型及应用[J].车用发动机,2007(4):37-41,45. |
| |
| 作者姓名： | 刘志恩 蒋炎坤 董哲林 叶晓明 陈国华 刘亚军 |
| |
| 作者单位： | [1]华中科技大学能源与动力工程学院,湖北武汉430074 [2]荆楚理工学院,湖北荆门448000 |
| |
| 基金项目： | 湖北省科技攻关项目资助（2006AA101C40） |
| |
| 摘 要： | 采用直接耦合的有限元分析方法对一汽油机的活塞组一气缸套系统的瞬态传热过程进行了研究。通过将润滑油膜假设为一维热阻，建立了活塞组气缸套整体耦合系统的三维传热模型，应用所开发的三维流体动压润滑分析程序对活塞环组沿周向瞬时变化的油膜厚度进行了计算与分析。以LJ377MV汽油机活塞组一气缸套零部件为对象进行了应用研究，获得了更为清晰的多部件间的相互传热关系。
|
| 关 键 词： | 汽油机 活塞组 气缸套 耦合系统 三维传热 有限元法 |
| 文章编号： | 1001-2222（2007）04-0037-05 |
| 修稿时间： | 2007-04-302007-05-20 |
Piston Set-cylinder Liner Coupled Heat Transfer Models and its Application in Gasoline Engine |
| |
| LIU Zhi-en , JIANG Yan-kun , DONG Zhe-lin , YE Xiao-ming , CHEN Guo-hua , LIU Ya-jun.Piston Set-cylinder Liner Coupled Heat Transfer Models and its Application in Gasoline Engine[J].Vehicle Engine,2007(4):37-41,45. |
| |
| Authors: | LIU Zhi-en JIANG Yan-kun DONG Zhe-lin YE Xiao-ming CHEN Guo-hua LIU Ya-jun |
| |
| Institution: | 1. School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China; 2. Jingchu University of Technology, Jingmen 448000, China |
| |
| Abstract: | The transient heat transfer process of piston set-cylinder liner system in gasoline engine was researched with direct coupling finite element method(FEM).The 3-D heat transfer models of piston set-cylinder liner coupling system was created on the assumption that the lubricant film was 1-D thermal resistance,and then the instantaneous varied lubricant film thickness along the circle of piston set was calculated and analyzed with the developed 3-D hydrodynamic lubrication analysis program.Taking LJ377MV engine for an example,the piston set-cylinder liner system was applied and researched.Finally,the clearer heat transfer correlation of multi-parts was acquired. |
| |
| Keywords: | gasoline engine piston set cylinder liner coupling system 3-D heat transfer FEM |
| 本文献已被 CNKI 维普 等数据库收录！ |
