首页 | 本学科首页   官方微博 | 高级检索  
     检索      

预应力混凝土箱梁支点不平整效应试验研究
引用本文:杨林浩,牛斌,杨梦蛟,马林.预应力混凝土箱梁支点不平整效应试验研究[J].中国铁道科学,2005,26(3):26-30.
作者姓名:杨林浩  牛斌  杨梦蛟  马林
作者单位:1. 中铁三局集团有限公司,山西,太原,0310001
2. 铁道科学研究院,铁道建筑研究所,北京,100081
基金项目:铁道部科技研究开发计划项目(2000G48 G)
摘    要:通过理论计算分析及跨度24m双线实体箱梁试验,研究预制箱梁支点不平整对箱梁受力的影响。在运输及施工阶段,箱梁4个支点的最大不平整量应控制在5mm之内;存放时及架设后,箱梁4个支点的最大不平整量应控制在3mm之内。建议在预制箱梁架设时,先采用千斤顶将支点反力调匀,然后再进行支座安装,以保证将支点不平整量控制在最小。

关 键 词:预应力混凝土箱梁  箱梁架设  支点不平整量  试验研究
文章编号:1001-4632(2005)03-0026-05
修稿时间:2004年1月5日

Test Study on the Uneven Effect of the Prestressed Concrete Box Girder
YANG Lin-hao,Niu Bin,YANG Meng-jiao,MA Lin.Test Study on the Uneven Effect of the Prestressed Concrete Box Girder[J].China Railway Science,2005,26(3):26-30.
Authors:YANG Lin-hao  Niu Bin  YANG Meng-jiao  MA Lin
Institution:YANG Lin-hao~1,NIU Bin~2,YANG Meng-jiao~2,MA Lin~2
Abstract:Influence on the mechanical behaviors of the box girder caused by the unevenness support of the precast box girder has been studied both by theoretical calculation analysis and the test of the double line solid box girder with 24 m span. In the process of transportation and construction, the maximum unevenness of the four supports of the box girder should be controlled within 5 mm. During storage and after the erection, the maximum unevenness of the four supports of the box girder should be controlled within 3 mm. It is suggested that, during the erection of the precast box girder, the reaction of support first be made even by jack, then supports be installed. In this way, the unevenness of the supports can be limited to minimum.
Keywords:Prestressed concrete box girder  Box girder erection  Support unevenness  Test study
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号