碎石化旧混凝土路面上沥青加铺层应力及顶面模量

将碎石化处治的旧水泥混凝土路面层视为宏观均匀、各向同性的线弹性体,采用双层弹性层状体系模型,深入分析了碎石化旧水泥混凝土路面上沥青加铺层的应力、弯沉变化规律,给出了对应不同交通量及沥青加铺层厚度下碎石化旧路面顸面最小回弹模量值,以及碎石化旧路面顶面最大容许弯沉值.研究表明,对应不同交通量和沥青加铺层厚度,要求碎石化旧水泥混凝土路面顶面弯沉在41～114(0.01 mm)之间变化,否则,顶面弯沉超过114(0.01mm),则碎石化旧路面不能提供所需的刚度要求,需另外设置基层后再加铺沥青层.

Loading Stress of Asphalt Overlay on Rubblized Cement Concrete Pavement and Related Resilient Modulus

The existing cement concrete pavement treated with rubblization technique was regarded as a linear, isotropic elastic body at macro level. By using a double-layer elastic system model, the stress and deflection of asphalt overlay were analyzed, the minimum resilient modulus and maximum allowable deflection on rubblized cement concrete pavement related to different traffic volumes and asphalt overlay thicknesses were discussed. The result indicates that in general the surface deflection on rubblized cement concrete pavement should vary from 41 to 114 (0.01 mm) against different traffic volumes and asphalt overlay thicknesses, otherwise the rubblized cement concrete pavement is incapable of meeting the requirement of structural stiffness, and a base layer shall be placed before paving asphalt overlay.