首页 | 本学科首页   官方微博 | 高级检索  
     检索      

耐候钢09CuPCrNi拉伸变形行为与组织变化的研究
引用本文:孙恩喜,谷维忠.耐候钢09CuPCrNi拉伸变形行为与组织变化的研究[J].大连铁道学院学报,1991,12(2):5-8.
作者姓名:孙恩喜  谷维忠
作者单位:大连铁道学院金属材料及工艺研究所,大连铁道学院金属材料及工艺研究所
摘    要:本文采用标准拉伸试验、光学金相和透射电镜研究了09CuPCrNi 热轧耐候钢的室温拉伸变形行为和组织变化结果表明,由于应力诱发马氏体相变发生及铁素体的加工硬化,引起材料出现锯齿状不连续屈服,应力诱发马氏体岛沿晶界呈连续网状分布及晶界珠光体组织导致塑性降低,马氏体岛由位错板条马氏体组成,变形后铁素体内位错密度升高.

关 键 词:耐候钢  马氏体转变  加工硬化  位错

The Characteristic of Tension Curve and Phase Transformation in Weather-Resistant Steel 09CuPCrNi
Sun Enxi Gu Weizhong.The Characteristic of Tension Curve and Phase Transformation in Weather-Resistant Steel 09CuPCrNi[J].Journal of Dalian Railway Institute,1991,12(2):5-8.
Authors:Sun Enxi Gu Weizhong
Institution:Matl.and Techn.Inst.
Abstract:Studies the characteristic of tension curve and phase transformation in weather-resistant steel 09CuPCrNi by means of tension test,optical microscope and TEM.The following results is obtained,the sawtooth incontinuous yield characteristic occurs because of stress-induced martensitic transformation and work hardening of ferrite,stress-induccd martensite islands spread in continuous mesh along the grain boundares and pearlites in grain boundares reduce plasticity,the martensite islands consist of dislocation laths,the dislocation in ferrite increase after deformation.
Keywords:weather-resistant steels  martensitic transformation  work hardening  yield point  dislocation
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号