首页 | 本学科首页   官方微博 | 高级检索  
     检索      

透层材料性能研究
引用本文:霍丽敏.透层材料性能研究[J].交通标准化,2014(1):23-25,29.
作者姓名:霍丽敏
作者单位:衡水路桥工程总公司,河北衡水053000
摘    要:采用煤油稀释沥青、乳化沥青和改性乳化沥青三种主要透层材料和水泥稳定碎石基层与二灰稳定碎石基层两种主要半刚性基层对透层性能进行研究.通过量测透层材料在基层内部的渗透深度研究不同稀释率、不同材料和基层类型以及水泥稳定碎石基层养生龄期对透层材料渗透性能的影响。并通过剪切试验得到不同喷洒用量下基面层间的抗剪强度.确定透层材料的最佳喷洒用量。

关 键 词:透层材料  稀释率  渗透  抗剪强度  喷洒

Performance of Prime Coat Material
HUO Li-min.Performance of Prime Coat Material[J].Communications Standardization,2014(1):23-25,29.
Authors:HUO Li-min
Institution:HUO Li-min (Hengshui Road & Bridge Engineering Corporation, Hengshui 053000, China)
Abstract:This paper uses three kinds of prime coat materials, which are kerosene cutback asphalt, emulsified asphalt and modified emulsified asphalt, and two kinds of semi-rigid base, which are cement stabilized macadam base and lime-fly ash stabilized bound macadam to study the performance of prime coat. By measuring the penetration depth of material inside the road base, it studies the effect on pene- tration performances by different dilution rate, different materials and base type, and the health preser- vation days of the cement stabilized macadam base. Through shearing test, it obtains the shear strength between the base and the surface under different dosage of spraying and determines the best dosage.
Keywords:prime coat material  dilution rate  penetration  shear strength  spray
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号