| 预应力混凝土弯箱梁桥支座反力及扭转分析 |
| |
| 引用本文： | 张贻能 刘华 俞博. 预应力混凝土弯箱梁桥支座反力及扭转分析[J]. 中南公路工程, 2007, 32(6): 34-38,43 |
| |
| 作者姓名： | 张贻能 刘华 俞博 |
| |
| 作者单位： | 江苏华通工程检测有限公司 江苏南京210005(张贻能)，东南大学交通学院 江苏南京210096(刘华，俞博) |
| |
| 基金项目： | 江苏省交通科学研究计划项目(03Y015) |
| |
| 摘 要： | 预应力混凝土连续弯箱梁桥容易出现支座脱空和扭转变形过大的问题,针对这一现象,从弯梁桥构造和外界因素等方面着手,采用空间有限元建立全桥仿真模型的方法进行分析,并选取一座曲率半径为60 m的弯梁桥,分析不同支座布置方式下的支座反力和扭转变形等问题。结果显示,预应力钢束产生的预加力和日照温差是弯梁桥出现支座脱空和扭转变形过大的主要因素,而布置合理的支座则是解决该问题的一个有效途径。
|
| 关 键 词： | 弯箱梁桥 支反力 扭转变形 |
| 文章编号： | 1002-1205（2007）06-0034-05 |
| 收稿时间： | 2006-10-23 |
| 修稿时间： | 2006-10-23 |
Recation and Torsion Analysis of PC Curved Box Girder Bridges |
| |
| ZHANG Yineng, LIU Hua, YU Bo. Recation and Torsion Analysis of PC Curved Box Girder Bridges[J]. Central South Highway Engineering, 2007, 32(6): 34-38,43 |
| |
| Authors: | ZHANG Yineng LIU Hua YU Bo |
| |
| Abstract: | In this paper,the problem of reaction and torsion of PC curved box-girder bridges was discussed with the space FEM(finite element method) which was used to construct the simulated model,Considering this structure and the factors such as temperature,vehicles etc.A curved bridge that it's curvature radius is 60m was selected and it's reaction and torsion was calculated and analyzed.The results shows that the force of prestress steel and sun's irradiation are the main factors which caused this problem,and reasonable supports configuration is one of the effective solutions. |
| |
| Keywords: | curved box-girder bridge bearing reaction torsional distortion |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
