首页 | 本学科首页   官方微博 | 高级检索  
     检索      

平板及立板式防波堤散射波浪力研究
引用本文:王科,高鑫,张犀.平板及立板式防波堤散射波浪力研究[J].船舶力学,2011,15(10).
作者姓名:王科  高鑫  张犀
作者单位:大连理工大学工业装备与结构分析国家重点实验室,工程力学系,辽宁大连116024;大连理工大学工业装备与结构分析国家重点实验室,工程力学系,辽宁大连116024;大连理工大学工业装备与结构分析国家重点实验室,工程力学系,辽宁大连116024
基金项目:大连市科技计划项目(2008A16GX248)
摘    要:文章应用边界单元方法研究了波浪与平板及立板两种防波堤结构的相互作用,揭示了这两种型式防波堤的散射波浪力与板的相对板厚、相对潜深及相对板长之间的关系。研究发现:(1)有效波浪力存在的前提条件是潜深小于0.5m并且板厚为O(0.005m);(2)水面和水下平板的垂荡波浪力为控制要素并有极值存在,横摇波浪力可以忽略;(3)水面或者水下立板的横荡波浪力为控制要素,并且横摇波浪力约为平板的20倍。

关 键 词:边界单元法  板式防波堤  横荡  垂荡  横摇波浪力

Study on wave exciting force of horizontal and vertical plate type breakwater
WANG Ke,GAO Xin,ZHANG Xi.Study on wave exciting force of horizontal and vertical plate type breakwater[J].Journal of Ship Mechanics,2011,15(10).
Authors:WANG Ke  GAO Xin  ZHANG Xi
Institution:WANG Ke,GAO Xin,ZHANG Xi (State Key Laboratory of Structural Analysis for Industrial Equipment,Department of Engineering Mechanics,Dalian University of Technology,Dalian 116024,China)
Abstract:The interaction between wave and horizontal and vertical plates is investigated by boundary element method, the relations of wave exciting force with plate thickness, submergence and length are obtained. It is found: (1) The efficient wave exciting force exists while plate submergence is less than 0.5m and plate is very thin with order O(0.005m); (2) The maximum heave wave exciting force exists and is main factor for surface and submerged horizontal plate while roll force can be ignored; (3) The maximum swa...
Keywords:boundary element method  plate type breakwater  heave  sway  roll wave exciting force  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号