首页 | 本学科首页   官方微博 | 高级检索  
     检索      

纳米压痕法测定Ni52.2Mn24.4Ga23.4马氏体的力学性能
引用本文:景晓,陆兴,张钦亮.纳米压痕法测定Ni52.2Mn24.4Ga23.4马氏体的力学性能[J].大连铁道学院学报,2006,27(2):63-66.
作者姓名:景晓  陆兴  张钦亮
作者单位:大连交通大学材料科学与工程学院 辽宁大连116028
基金项目:国家自然科学基金资助项目(50171016)
摘    要:利用纳米压痕法测定了N i52.2Mn24.4Ga23.4单个晶粒内马氏体的力学性能.实验表明:加载过程中马氏体产生弹性与塑性变形,且随着载荷的增大,材料的变形方式逐渐以塑性变形为主,并伴随有不同程度的蠕变.N i52.2Mn24.4Ga23.4单个晶粒上两片马氏体的平均弹性模量分别为82.15GPa、88.0GPa;平均硬度值分别为3.91Gpa、3.60GPa,不同马氏体片的力学性能存在差异.

关 键 词:Ni-Mn-Ga  马氏体  纳米压痕
文章编号:1000-1670(2006)02-0063-04
收稿时间:2006-01-16

Measurement of Mechanical Property of Martensite in Ni52.2Mn24.4Ga23.4Alloy by using Nanoindentation
JING Xiao, LU Xing,ZHANG Qin-liang.Measurement of Mechanical Property of Martensite in Ni52.2Mn24.4Ga23.4Alloy by using Nanoindentation[J].Journal of Dalian Railway Institute,2006,27(2):63-66.
Authors:JING Xiao  LU Xing  ZHANG Qin-liang
Abstract:Mechanical property of the martensite in a single crystal grain of Ni_(52.2)Mn_(24.4)Ga_(23.4 )was investigated by nanoindention technique.The results show that both elastic and plastic deformation of the martensite occur during loading.With increasing load,plastic deforming becomes dominant,and creep also occurs during deformation,especially at higher load.The average elastic modulus of two martensite variants are 82.15 and 88.0 GPa respectively;and the average hardness are 3.91GPa and 3.60GPa respectively.The mechanical properties are different between the two martensite variants,even in different locations of a single martensite variant.
Keywords:Ni-Mn-Ga  martensite  nanoindentation
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号