| 后鳍机构强度分析及应力对比分析 |
| |
| 引用本文： | 罗桂山,徐军,薛琳.后鳍机构强度分析及应力对比分析[J].船舶工程,2017,39(S1):113-116. |
| |
| 作者姓名： | 罗桂山 徐军 薛琳 |
| |
| 作者单位： | 海军驻上海所军事代表室,中国船舶重工集团公司第研究所,中国船舶重工集团公司第研究所 |
| |
| 摘 要： | 本文介绍了小水线面双体船后鳍机构的组成及主要设计输入,采用经典算法计算了鳍轴在正常工作时的应力,采用有限元分析法计算了鳍柄的应力,并将此应力与航行试验时通过应变片实测的应力进行对比。对比结果表明,两者误差百分比约为4%,在工程许可的误差范围内。
|
| 关 键 词： | 后鳍机构 强度分析 应力对比 |
| 收稿时间： | 2017/5/17 0:00:00 |
| 修稿时间： | 2017/5/17 0:00:00 |
Analysis Report of FEM Simulation and Comparison ofAfter Fin of SWATH |
| |
| LUO Guishan,XU Jun and XUE Lin.Analysis Report of FEM Simulation and Comparison ofAfter Fin of SWATH[J].Ship Engineering,2017,39(S1):113-116. |
| |
| Authors: | LUO Guishan XU Jun and XUE Lin |
| |
| Institution: | Navy Representative Office at No Research Institute,CSIC,No Research Institute,CSIC,No Research Institute,CSIC |
| |
| Abstract: | The components of the after fin of SWATH is introduced in this paper, then the stress of the fin shaft is calculated classically, the stress of the fin crane is simulated via FEM afterwards, then a comparison of the stress calculated with the sea test is accomplished with a result of difference less than 4%, which is acceptable in engineering. |
| |
| Keywords: | after fin of SWATH strength analysis stress comparison |
|
| 点击此处可从《船舶工程》浏览原始摘要信息 |
| 点击此处可从《船舶工程》下载免费的PDF全文 |
|
