| 数控铣削加工中防止撞刀的措施 |
| |
| 引用本文： | 杜军.数控铣削加工中防止撞刀的措施[J].武汉船舶职业技术学院学报,2007,6(2):44-47. |
| |
| 作者姓名： | 杜军 |
| |
| 作者单位： | 武汉工交职业学院机电工程系,湖北武汉,430205 |
| |
| 摘 要： | 本文以铣削加工为例,分析加工零件时,出现加工误差、撞断刀具的原因,提出了几种防止撞断刀具的方法以及应注意的事项,特别对如何正确使用刀具长度补偿指令进行了说明。
|
| 关 键 词： | 铣削加工 撞刀 刀具长度补偿 换刀点 |
| 文章编号： | 1671-8100（2007）02-0044-04 |
| 修稿时间： | 2007-02-08 |
Preventing Milling Cutter from Crashing in Processing of NC |
| |
| DU Jun.Preventing Milling Cutter from Crashing in Processing of NC[J].Journal of Wuhan Institute of Shipbuilding Technology,2007,6(2):44-47. |
| |
| Authors: | DU Jun |
| |
| Institution: | Wuhan Polytechnic College Of Industry and Communication, Wuhan 430205,China |
| |
| Abstract: | This paper takes milling as an example,it analyzes the cause of error and the reason of breaking milling cutter.It proposes several methods to prevent the cutting tool from crashing as well as precaution items. The writer emphasizes the importance of correctly using the instruction of the cutting tool length compensation. |
| |
| Keywords: | milling cutter crashing the cutter compensating length cutter exchange spot |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
