|
|||||
|
|
| 发动机机体主油道滚压工艺研究 | |
| 引用本文： | 石阳,张永,韩琦.发动机机体主油道滚压工艺研究[J].车用发动机,2007(5):78-80. |
| 作者姓名： | 石阳 张永 韩琦 |
| 作者单位： | 1. 中国人民解放军总装备部装甲兵军事代表局,北京,100851 2. 山西柴油机工业有限责任公司,山西,大同,037036 3. 驻山西柴油机工业有限责任公司军事代表室,山西,大同,037036 |
| 摘 要： | 简要分析了某发动机机体主油道滚压技术要求和滚压过程中存在的主要问题及其对发动机造成的影响,并针对这些问题从滚压机转速、滚压力、滚压位置调节器、油管材料、油孔位置、机体主油道的加工质量等方面进行技术分析和工艺试验,最终得出机体主油道滚压的合理技术参数和工艺方法,使发动机机体主油道滚压过程中存在的问题得以解决。 |
| 关 键 词： | 发动机机体 主油道 滚压压力 滚压机转速 油孔位置 |
| 文章编号： | 1001-2222（2007）05-0078-03 |
| 修稿时间： | 2007-06-08 |
Study on Rolling Technology of Main Oil Gallery on the Engine Block |
|
| SHI Yang,ZHANG Yong,HAN Qi.Study on Rolling Technology of Main Oil Gallery on the Engine Block[J].Vehicle Engine,2007(5):78-80. | |
| Authors: | SHI Yang ZHANG Yong HAN Qi |
| Institution: | 1. The Armored Forces Military Representative Bureau of the PLA General Equipment Headquarters, Beijing 100851, China; 2. Shanxi Diesel Engine Industry Corporation, Datong 037036, China; 3. Military Delegate Branch in Shanxi Diesel Engine Industry Corporation, Datong 037036, China |
| Abstract: | The rolling technical requirements of main oil gallery on an engine boy,the main problems during the rolling process and their effects on engine were analyzed briefly,and were technically analyzed and technically tested for further considering the speed of rolling machine,the rolling pressure,the regulator of rolling location and the processing quality of main oil gallery.Accordingly,the reasonable technical parameters and technical methods of main oil gallery were acquired and the problems during the rolling process of main oil gallery were also resolved simultaneously. |
| Keywords: | engine block main oil gallery rolling pressure the speed of rolling machine oil-hole location |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |