首页 | 本学科首页   官方微博 | 高级检索  
     

基于调制白噪声与查表法的非平稳路面不平度建模方法
引用本文:陈士安, 仝嘉成, 蒋旭东, 王亚雄, 姚明. 基于调制白噪声与查表法的非平稳路面不平度建模方法[J]. 交通运输工程学报, 2020, 20(6): 171-179. doi: 10.19818/j.cnki.1671-1637.2020.06.015
作者姓名:陈士安  仝嘉成  蒋旭东  王亚雄  姚明
作者单位:1.江苏大学 汽车与交通工程学院, 江苏 镇江 212013;;2.福州大学 机械工程及自动化学院, 福建 福州 350116
基金项目:江苏省重点研发计划;国家自然科学基金
摘    要:针对实测道路功率谱密度频率结构不同与汽车行驶速度变化引起的非平稳问题, 分析了现有路面不平度模型的准确性, 提出了一种基于调制白噪声与查表法的非平稳路面不平度建模方法; 结合白噪声生成方法和离散功率谱密度的计算公式, 推导出了能够确保路面不平度计算功率谱与设计功率谱完全吻合的Band-Limited White Noise模块参数设定方法; 通过不同设定值组合的白噪声功率谱密度与路面不平度功率谱密度计算结果对比, 验证了所提出的Band-Limited White Noise模块参数设定值的准确性; 为解决频率指数不等于2的空间域内非平稳路面不平度建模问题, 提出了由1个基准项和若干个精度校正项组成, 且调制传递函数模的平方逼近具有任意频率指数的道路功率谱表达式; 为获取考虑车速变化影响的频率时变的时域内非平稳路面不平度输入模型, 基于空间路面不平度固定不变的原理, 提出了利用查表法, 获得变车速工况下时域内非平稳路面不平度; 通过空间域内非平稳路面不平度建模及考虑车速变化的非平稳路面不平度建模应用, 验证了所提建模方法的优越性。研究结果表明: 使用基于调制白噪声的非平稳路面不平度建模方法构建的空间域路面不平度功率谱曲线, 与应用实例中的设计目标曲线吻合良好, 且结合查表法可以有效地解决时变车速带来的时域内非平稳路面不平度建模问题。

关 键 词:汽车工程   路面不平度   非平稳路面   调制白噪声   查表法   参数设置
收稿时间:2020-06-18

Modeling method for non-stationary road irregularity based on modulated white noise and lookup table method
CHEN Shi-an, TONG Jia-cheng, JIANG Xu-dong, WANG Ya-xiong, YAO Ming. Modeling method for non-stationary road irregularity based on modulated white noise and lookup table method[J]. Journal of Traffic and Transportation Engineering, 2020, 20(6): 171-179. doi: 10.19818/j.cnki.1671-1637.2020.06.015
Authors:CHEN Shi-an  TONG Jia-cheng  JIANG Xu-dong  WANG Ya-xiong  YAO Ming
Affiliation:1. School of Automotive and Traffic Engineering, Jiangsu University, Zhenjiang 212013, Jiangsu, China;;2. School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350116, Fujian, China
Abstract:To solve non-stationary problems caused by different power spectrum density(PSD) frequency structures of measured roads and vehicle speeds, a modulated white noise and lookup table based modeling methods were proposed based on an analysis of the accuracy of existing road roughness models. Combining the white noise generation method with the calculation formula of discrete PSD, a parameter setting method of Band-Limited White Noise module was developed to ensure the calculated power spectrum of road irregularity is fully consistent with the designed power spectrum.The accuracy of the proposed Band-Limited White Noise module parameter setting value was verified by comparing calculation results of white noise power spectrum density and road roughness power spectrum density according to different combinations of setting values. To solve the modeling problem of non-stationary road in spatial domain whose frequency index is not equal to 2, a road power spectrum expression was proposed, which consists of a reference item and several precision corrected items, and modulus square of modulation transfer function approximates arbitrary frequency exponent. To obtaining a frequency-time-varying input model of non-stationary road considering the influence effects of vehicle speed change in time domain, a lookup table operation was used to obtain time-domain non-stationary road irregularity derived from time-varying vehicle speed based on a fixed spatial road irregularity. The superiority of the proposed modeling methods was verified by applications of spatial-domain non-stationary road irregularity modeling and non-stationary road irregularity modeling considering time-varying vehicle speed. Research result shows that the power spectrum density curves of road irregularity in spatial domain constructed by modulated white noise based non-stationary road irregularity modeling method agree well with the designed objective curves in the application examples. The non-stationary problem of road irregularity caused by time-varying vehicle speed is effectively solved by using the lookup table method. 
Keywords:automotive engineering  road irregularity  non-stationary road  modulated white noise  lookup table method  parameter setting
本文献已被 万方数据 等数据库收录!
点击此处可从《交通运输工程学报》浏览原始摘要信息
点击此处可从《交通运输工程学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号