首页 | 本学科首页   官方微博 | 高级检索  
     检索      

清水池水力效率影响因素研究
引用本文:朱智勇.清水池水力效率影响因素研究[J].城市道桥与防洪,2024(1):230-232.
作者姓名:朱智勇
基金项目:基金项目: 上海市科学技术委员会科研项目(22dz1209100)
摘    要:清水池具有水力调节和消毒接触的双重作用,提高t10 /T是提高消毒效率而减少消毒剂投加量和副产物生成量的有效方法。针对清水池实例,进行整体建模,以数值模拟方法,研究主要尺寸对清水池t10 /T的影响程度,并验证设计方案的合理性。结果表明:长宽比是t10 /T影响最为明显的因素,但变大的趋势放缓。减少弯道数量及宽度和增大进水管管径,均可使t10 /T有所增加。清水池实例的长宽比为38,水力效率为0.54,可以满足不少于0.5的设计要求。

关 键 词:清水池  CFD  长宽比  弯道  进水  t10  /T
收稿时间:2023/6/27 0:00:00

Study on Factor Influencing Hydraulic Efficiency of Clear Water Tank
ZHU Zhiyong.Study on Factor Influencing Hydraulic Efficiency of Clear Water Tank[J].Urban Roads Bridges & Flood Control,2024(1):230-232.
Authors:ZHU Zhiyong
Abstract:The clear water tank has the dual function of hydraulic regulation and disinfection contact. The improvement of t10 /T is an important means to improve the disinfection efficiency and reduce the disinfector dosage and its by-products. Aiming at a case of clear water tank, the overall modeling is carried out. By numerical simulation method, the influence of main dimensions on t10 /T clear water tank is studied, and the rationality of the design scheme is verified. The result shows that the length-width ratio is the most obvious factor to influence t10 /T, but the trend of increasing is slowing down. The t10 /T can be increased by reducing the number and width of bends and increasing the diameter of influent pipe. The length-width ratio of the clear water tank is 38 and the hydraulic efficiency is 0.54 in a case, which can meet the design requirement of not less than 0.5.
Keywords:clear water tank  CFD  length-width ratio  curve  influent  t10 /T
点击此处可从《城市道桥与防洪》浏览原始摘要信息
点击此处可从《城市道桥与防洪》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号