| 基于一体化平台的海洋脐带缆设计 |
| |
| 引用本文： | 王翀,毛英超,郑利军,邓小康.基于一体化平台的海洋脐带缆设计[J].船舶工程,2020,42(S1):455-459. |
| |
| 作者姓名： | 王翀 毛英超 郑利军 邓小康 |
| |
| 作者单位： | 上海利策科技股份有限公司,上海利策科技股份有限公司,中海油研究总院有限责任公司,所在地 邮编,中海油研究总院有限责任公司,所在地 邮编 |
| |
| 基金项目： | 国家重点研发计划(2016YFC0302900) |
| |
| 摘 要： | 针对深海脐带缆工程设计过程,使用一体化的海洋工程设计平台进行脐带缆的截面选型、线形设计、强度分析、规范校核。并使用一体化平台实现脐带缆的建模,计算工况设置,生成计算模型,导入商业软件分析和结果处理过程。在设计阶段对多种截面在多种工况条件下进行模拟,得到各截面脐带缆关键性能参数,通过脐带缆方案比选,确定脐带缆设计方案。
|
| 关 键 词： | 脐带缆 一体化平台 布局设计 顶部张力 |
| 收稿时间： | 2020/6/12 0:00:00 |
| 修稿时间： | 2020/8/14 0:00:00 |
Design of Ocean Umbilical Based on Integrated Design Platform |
| |
| Wang Chong,and.Design of Ocean Umbilical Based on Integrated Design Platform[J].Ship Engineering,2020,42(S1):455-459. |
| |
| Authors: | Wang Chong and |
| |
| Abstract: | Aiming at the deep sea umbilical cable engineering design process, an integrated offshore engineering platform is used for umbilical selection, linear design, strength analysis, and role or standard check. The umbilical is modeled through the integrated platform, the calculation conditions are set in platform, then the calculation model is generated, and imported into commercial software for analysis. In the design stage, a variety of cross-sections were simulated under static and dynamic conditions to obtain the key performance parameters of the umbilical. Through the comparison and selection of umbilical plan, the umbilical design was determined. |
| |
| Keywords: | umbilical integrated design platform linear design top tension |
|
| 点击此处可从《船舶工程》浏览原始摘要信息 |
| 点击此处可从《船舶工程》下载免费的PDF全文 |
|
