首页 | 本学科首页   官方微博 | 高级检索  
     

载货汽车运行燃料消耗量计算方法研究
引用本文:韩国庆,蔡凤田,董金松. 载货汽车运行燃料消耗量计算方法研究[J]. 公路交通科技, 2009, 26(9)
作者姓名:韩国庆  蔡凤田  董金松
作者单位:1. 交通部公路科学研究院,北京,100088
2. 吉林大学,交通学院,吉林,长春,130022
基金项目:交通部西部交通建设科技资助项目 
摘    要:在分析计算汽车运行燃料消耗主要影响因素的基础上,建立了通用的载货汽车运行燃料消耗量计算方法,将实际测试的空载(整备质量)和满载(最大总质量)等速燃料消耗量确定为计算汽车在运行时燃料消耗量的基本数值.在该计算方法中引入运行模式和车速加权系数,以综合反映运行条件的变化对汽车燃料消耗量的影响,并采用发动机台架试验模拟汽车的道路行驶状况,对不同的汽车总质量和车速下运行燃料消耗量的变化规律进行验证.通过该方法可以计算各种型号的载货汽车在不同整备质量、载质量和行驶速度等运行条件下的燃料消耗量.

关 键 词:汽车工程  计算方法  模拟试验  燃料消耗量  载货汽车

Study on Calculation Method for Fuel Consumption of Trucks in Operation
HAN Guoqing,CAI Fengtian,DONG Jinsong. Study on Calculation Method for Fuel Consumption of Trucks in Operation[J]. Journal of Highway and Transportation Research and Development, 2009, 26(9)
Authors:HAN Guoqing  CAI Fengtian  DONG Jinsong
Affiliation:1.Research Institute of Highway;Ministry of Communications;Beijing 100088;China;2.School of Transportation;Jilin University;Changchun Jilin 130022;China
Abstract:Based on the computation and analysis of main influence factors of fuel consumption,a general calculation method for fuel consumption of trucks in operation was established,in which the constant speed fuel consumption obtained in road test under no-load(kerb mass) and full-load conditions(maximum total mass) are considered as the basic data for the fuel consumption calculation of trucks in operation.The operation mode and the weighted coefficient of velocity were introduced into the calculation method to co...
Keywords:automobile engineering  calculation method  simulation test  fuel consumption  truck  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号