| 轮式铣刨机电辅助驱动系统速度匹配分析 |
| |
| 引用本文： | 董菲,胡永彪,梁金宝.轮式铣刨机电辅助驱动系统速度匹配分析[J].筑路机械与施工机械化,2013,30(10):79-81,85. |
| |
| 作者姓名： | 董菲 胡永彪 梁金宝 |
| |
| 作者单位： | 1. 安徽大学电气工程与自动化学院,安徽合肥,230601
2. 长安大学工程机械学院,陕西西安,710064 |
| |
| 摘 要： | 以轮式铣刨机为研究对象，针对前桥驱动牵引力不足的情况进行后轮电辅助驱动，在对铣刨机辅助驱动运动学研究的基础上，设计了电辅助驱动速度匹配策略，建立了该铣刨机电辅助驱动的数学模型，并运用Simulink模块对其进行了仿真分析。结果表明：前、后轮速度匹配策略确实可行。
|
| 关 键 词： | 铣刨机 电辅助驱动 速度匹配 仿真分析 |
Analysis on Speed Matching of Electric Auxiliary Drive System for Wheeled Milling Machine |
| |
| DONG Fei
,
HU Yong-biao
,
LIANG Jin-bao.Analysis on Speed Matching of Electric Auxiliary Drive System for Wheeled Milling Machine[J].Road Machinery & Construction Mechanization,2013,30(10):79-81,85. |
| |
| Authors: | DONG Fei HU Yong-biao LIANG Jin-bao |
| |
| Institution: | 1. College of Electrical Engineering, An＇hui University, Hefei 230601, An＇hui, China; 2 Construction Machinery, Chang＇an University, Shaanxi 710064, Xi＇an, China) |
| |
| Abstract: | Based on the research of wheeled milling machine, the scheme of power auxiliary drive system on rear wheel was designed due to the deficiency of front axle traction. The theory about dynamics of wheeled milling machine was analyzed, so was the front and rear wheel speed matching. The mathematical model of milling machine＇s auxiliary drive system was built, and the simulation was conducted by the Simulink module of MATLAB. The results show that the strategy of front and rear wheel speed matching has been feasible. |
| |
| Keywords: | milling machine electric auxiliary drive speed matching simulation analysis |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
