| 螺纹加工中常见问题与解决方法 |
| |
| 引用本文： | 何琳,贾文征,孙洪珍.螺纹加工中常见问题与解决方法[J].摩托车技术,2014(1):49-51. |
| |
| 作者姓名： | 何琳 贾文征 孙洪珍 |
| |
| 作者单位： | 济南轻骑发动机有限公司 |
| |
| 摘 要： | 采用正反车法来退刀,即在第1次行程结束时不提起开合螺母,把刀沿径向退出后,将主轴反转,使车刀沿纵向退回,再进行第2次行程,这样往复过程中,因主轴、丝杠和刀架之间的传动没有分离过,车刀始终在原来的螺旋槽中,就不会出现错丝。
|
| 关 键 词： | 螺纹加工 螺距 表面粗糙度 |
Analysis on the Regular Problems During the Thread Machining and Solutions |
| |
| He Lin;Jia Wenzheng;Sun Hongzhen.Analysis on the Regular Problems During the Thread Machining and Solutions[J].Motorcycle Technology,2014(1):49-51. |
| |
| Authors: | He Lin;Jia Wenzheng;Sun Hongzhen |
| |
| Institution: | He Lin;Jia Wenzheng;Sun Hongzhen;Jinan Qingqi Engine Co.,Ltd.; |
| |
| Abstract: | This paper introduces a solution to the problem in thread machining. To withdraw the lathe tool with reverse method-i.e do not withdraw the lathing tool during the first cycle, and reverse the main shaft to conduct the second cycle. This method can effectively avoid the fault during machining. |
| |
| Keywords: | Thread machining Pitch Surface roughness |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
