| Abstract: | This paper describes an approach for evaluating alternative traffic detection designs for a signalized intersection. The models described in this paper can be used to determine the average phase duration and frequency of phase “max-out” as a function of the detector loop layout, detector unit timing, traffic demand, and approach speed. Layout and timing are described by the number of detectors on each approach served by the phase, detector location on each approach, detector length, and detector unit and controller time settings. The authors have used the concept of maximum allowable headway (MAH) to combine the many possible combinations of layout and timing variables into one representative quantity, which greatly simplifies the modelling process. The performance models were used to examine the sensitivity of intersection performance to a range of design values. In general, both phase duration and cycle length increase with higher demands or larger MAHs. Multiloop (i.e. two or more detection zones per lane) detector designs typically have larger MAHs than designs with one detector loop per lane. Phase duration and cycle length also increase for very low demand levels. In terms of performance, the maximum green duration was found to have a contrary effect at higher flow conditions. Larger maximum greens were found to reduce delays to the phase in service by reducing the probability of max-out but they increased delays to drivers waiting for service. |
