|
|||||
|
|
| 6AT控制器的快速控制原型及硬件在环仿真研究 | |
| 引用本文： | 张炳力,杜红亮,金朝勇,赵韩,冯有成,周小华.6AT控制器的快速控制原型及硬件在环仿真研究[J].汽车工程,2011,33(8). |
| 作者姓名： | 张炳力 杜红亮 金朝勇 赵韩 冯有成 周小华 |
| 作者单位： | 1. 合肥工业大学机械与汽车工程学院,合肥,230009 2. 安徽省交通职业技术学院,合肥,230051 3. 江淮汽车技术中心,合肥,230091 |
| 基金项目： | 国家科技支撑计划项目(2009BAG12B0003); 国家863计划项目(2009AA11A13); 安徽省科技计划项目(10020203026)资助 |
| 摘 要： | 介绍了6AT的控制策略;进行了其控制器快速控制原型仿真和硬件在环仿真试验,并使用开发的6AT控制器进行样车试验。结果表明,该控制器满足性能要求,快速控制原型及其硬件在环仿真能提高控制器的开发效率。 |
| 关 键 词： | 自动变速器 变速器控制器 快速控制原型 硬件在环仿真 |
A Research on Rapid Control Prototyping and Hardware-in-the-Loop Simulation for the Control Unit of Six Speed Automatic Transmission |
|
| Zhang Bingli,Du Hongliang,Jin Chaoyong,Zhao Han,Feng Youcheng,Zhou Xiaohua.A Research on Rapid Control Prototyping and Hardware-in-the-Loop Simulation for the Control Unit of Six Speed Automatic Transmission[J].Automotive Engineering,2011,33(8). | |
| Authors: | Zhang Bingli Du Hongliang Jin Chaoyong Zhao Han Feng Youcheng Zhou Xiaohua |
| Institution: | Zhang Bingli1,Du Hongliang1,Jin Chaoyong2,Zhao Han1,Feng Youcheng3 & Zhou Xiaohua31.School of Machinery and Automobile Engineering,Hefei University of Technology,Hefei 230009,2.Anhui Communication Vocational & Technical College,Hefei 230051,3.JAC Technical Center,Hefei 230091 |
| Abstract: | The control strategy of six-speed automatic transmission(6AT) is presented.Both rapid control prototyping(RCP) simulation and hardware-in-the-loop simulation(HILS) test on transmission control unit(TCU) are carried out,and the sample vehicle test with TCU developed for 6AT is also conducted.The results show that the TCU meets its performance requirements,and RCP and HILS can enhance the development efficiency of TCU. |
| Keywords: | AT TCU RCP HILS |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |